Lucas Nülle - IMS 16 Painting subsystem

IMS 16 Painting subsystem

IMS 16 Painting subsystem

There is a workpiece carrier with a completely assembled car on the conveyor belt. The workpiece carrier is positioned in the painting station. The gates to the painting station are closed. During the painting process the suction system must be activated. The painting process starts and this is displayed by LED strips. After the painting process has been completed the gates are opened and the workpiece carrier loaded with the painted car proceeds to the end of the conveyor belt where it is to be taken by the next subsystem.

Training content:

Basic notes on conducting experiments
Detailed experiment description
Basic information on the sequence control system
Programming the sequence control system
Programming a micro-controller
Triggering the LED strips via the micro-controller

Weboffer

0 Article

Real Experience Learning

Interactive learning environment

Downloads

Equipment
Specifications

Tender specifications

Equipment set comprising the following:
1	Cyber physical conveyor system with PLC	LM9515
1	Painting station	LM9644
1	Symmetrical workpiece transport pallet	LM9532
2	Battery for the car / van PCB	LM9562
2	PCB for car / van production	LM9563
2	Chassis of the car / van	LM9564
1	Car body	LM9565
1	Van body	LM9566
1	WiFi Router	LM9558

Media:
1	Interactive Lab Assistant: IMS 1 Cyber Physical Conveyor Belt System	SO2805-5H
1	Interactive Lab Assistant: IMS 16 Painting station	SO2805-5Q
1	Interactive Lab Assistant: Web-Link of Cyber-Physical Systems	SO2805-5Y
1	QuickChart IMS 1.5 Cyber-physical conveyor belt system	SO6200-2P
1	QuickChart IMS 16 Mechatronics Painting Station	SO6200-2V

Accessories:
1	SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm	ST7200-7A
1	DC power supply 24 V/5 A for IMS conveyor belts	LM9672
1	Interface cable 25-pin, Sub-D socket / plug 1m	LM9066

Additionally recommended:
1		Compressor, low-noise	SE2902-9L
1		Tubing and accessory set for mechatronics systems	LM9571
1		Monitor holder for flat screen monitor of weight up to 15kg/33lbs	ST8010-4T
1		Protection cover for three-level experiment trolleys	ST7200-5L
1		Set of Allen keys	LM9716
	In areas where there are high levels of humidity the membrane dryer with water trap should be used to avoid... more In areas where there are high levels of humidity the membrane dryer with water trap should be used to avoid condensation: less
1		IDG3 membrane dryer with rapid coupling and filter AF20 with water trap	LM9671