IMS 5d Processing with double magazine

IMS 5d Processing with double magazine

 

There is a workpiece carrier with a completely assembled two-part workpiece on the conveyor belt, (top and bottom part). The workpiece carrier is positioned in the processing installation. The workpiece is attached for processing. A bolt from one of the two magazine drops is pressed into the bore holds of the workpiece. The loaded workpiece carrier proceeds to the end of the conveyor belt where it is to be taken by the next subsystem.

Training contents:

  • Basic notes on conducting experiments
  • Detailed experiment description
  • Basic notes on control sequences
  • Programming the sequential process control
Equipment set comprising the following:
1
Cyber physical conveyor system with PLC
Cyber physical conveyor system with PLC LM9515
1
Processing double station
Processing double station LM9647
1
IMS displacement measurement module
IMS displacement measurement module LM9677
1
Symmetrical workpiece transport pallet
Symmetrical workpiece transport pallet LM9532
1
Workpiece, top section, white
Workpiece, top section, white LM9521
1
Workpiece, bottom section, black
Workpiece, bottom section, black LM9525
3
Bolt workpiece, metal
Bolt workpiece, metal LM9527
3
Bolt workpiece, plastic red
Bolt workpiece, plastic red LM9528
Media:
1
Interactive Lab Assistant: IMS 1 Cyber Physical Conveyor Belt System
Interactive Lab Assistant: IMS 1 Cyber Physical Conveyor Belt System SO2805-5H
1
Interactive Lab Assistant: IMS X Mechatronic Basic Stations
Interactive Lab Assistant: IMS X Mechatronic Basic Stations SO2805-5X
1
QuickChart IMS 1.5 Cyber-physical conveyor belt system
QuickChart IMS 1.5 Cyber-physical conveyor belt system SO6200-2P
1
QuickChart IMS 5d Mechatronics Processing double station
QuickChart IMS 5d Mechatronics Processing double station SO6200-2S
Accessories:
1
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm ST7200-7A
1
DC power supply 24 V/5 A for IMS conveyor belts
DC power supply 24 V/5 A for IMS conveyor belts LM9672
1
Interface cable 25-pin, Sub-D socket / plug 1m
Interface cable 25-pin, Sub-D socket / plug 1m LM9066
Additionally recommended:
1
Compressor, low-noise
Compressor, low-noise SE2902-9L
1
Tubing and accessory set for mechatronics systems
Tubing and accessory set for mechatronics systems LM9571
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
Monitor holder for flat screen monitor of weight up to 15kg/33lbs ST8010-4T
1
Protection cover for three-level experiment trolleys
Protection cover for three-level experiment trolleys ST7200-5L
1
Set of Allen keys
Set of Allen keys LM9716

In areas where there are high levels of humidity the membrane dryer

with water trap should be used to avoid...   more

1
IDG3 membrane dryer with rapid coupling and filter AF20 with water trap
IDG3 membrane dryer with rapid coupling and filter AF20 with water trap LM9671
Optional Accessories:
1
Touch Panel KTP700 Basic Trainer Package
Touch Panel KTP700 Basic Trainer Package CO3713-4Q
1
IMS manual control unit
IMS manual control unit LM9638