Lucas Nülle - IMS 5d Processing with double magazine

IMS 5d Processing with double magazine

IMS 5d Processing with double magazine

There is a workpiece carrier with a completely assembled two-part workpiece on the conveyor belt, (top and bottom part). The workpiece carrier is positioned in the processing installation. The workpiece is attached for processing. A bolt from one of the two magazine drops is pressed into the bore holds of the workpiece. The loaded workpiece carrier proceeds to the end of the conveyor belt where it is to be taken by the next subsystem.

Training contents:

Basic notes on conducting experiments
Detailed experiment description
Basic notes on control sequences
Programming the sequential process control

Weboffer

0 Article

Downloads

Equipment
Specifications

Tender specifications

Equipment set comprising the following:
1	Cyber physical conveyor system with PLC	LM9515
1	Processing double station	LM9647
1	IMS displacement measurement module	LM9677
1	Symmetrical workpiece transport pallet	LM9532
1	Workpiece, top section, white	LM9521
1	Workpiece, bottom section, black	LM9525
3	Bolt workpiece, metal	LM9527
3	Bolt workpiece, plastic red	LM9528

Accessories:
1		DC power supply 24 V/5 A for IMS conveyor belts		LM9672
1		Interface cable 25-pin, Sub-D socket / plug 1m		LM9066

Media:
1	Interactive Lab Assistant: IMS 1 Cyber Physical Conveyor Belt System	SO2805-5H
1	Interactive Lab Assistant: IMS X Mechatronic Basic Stations	SO2805-5X
1	QuickChart IMS 1.5 Cyber-physical conveyor belt system	SO6200-2P
1	QuickChart IMS 5d Mechatronics Double Storage Processing sub-system	SO6200-2S

Additionally recommended:
1		Compressor, low-noise	SE2902-9L
1		Tubing and accessory set for mechatronics systems	LM9571
1		Set of Allen keys	LM9716
1		Mechatronics experiment trolley with 2 level frame 1200x760x900mm WxHxDxD	ST7200-3T
1		Monitor holder for flat screen monitor of weight up to (10kg / 22lbs)	ST8010-4K
1		Protective cover for 1200mm wide IMS experiment trolleys with training panel	ST8010-8L
	In areas where there are high levels of humidity the membrane dryer with water trap should be used to avoid... more In areas where there are high levels of humidity the membrane dryer with water trap should be used to avoid condensation: less
1		IDG3 membrane dryer with rapid coupling and filter AF20 with water trap	LM9671