Skip to content

Busbar Systems

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Busbar Systems

EPD11PT

Complete training equipment for three-phase double busbars up to 500 V: students switch the incoming feeder, outgoing feeder and bus coupler bays, change busbars without interruption and control the system via SCADA.

Learning Content
  • Analyzing the structure of switchgear
  • Distinguishing between switching devices
  • Carrying out switching operations
  • Changing busbars without interruption
KEY FEATURES
  • Three-phase double busbars up to 500 V
  • Uninterrupted busbar changeover
  • Interlocking logic to prevent incorrect operation
  • Protective monitors for automatic fault monitoring
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Busbar systems are the nodes where electrical energy is collected and distributed. In high-voltage switchgear, switching errors lead to arcing and serious damage to property, so the switching sequence must be right. The equipment set replicates real three-phase double busbars with incoming feeder, outgoing feeder and bus coupler bays at line-to-line voltages of up to 500 V. Students develop switching algorithms, transfer loads between the busbars without interrupting the supply and evaluate the equalizing currents during coupling. Interlocking logic blocks incorrect operations and signals them visually and audibly. Students use the SCADA Viewer to control and log the system and program their own switching sequences with the integrated soft PLC.

CO3301-5RDouble busbar unit, three-phase, incoming / outgoing feeder
CO3301-5SDouble busbar unit, three-phase, coupler panel
CO3301-3HOhmic load 3x 560 Ohm
SO2800-9NInteractive Lab Assistant: Bus bar systems
CO3301-3FVariable Ohmic load, three-phase, 1kW
SO4001-3HSoftware SCADA Viewer
CO3301-3ZAdjustable 3-phase power supply, 0-450V/2A
CO5127-1SThree-phase power quality meter with display and long-term memory
LM9057Patch cable Cat5E 1x 1m yellow, 2x 2m yellow
LM8257USB 2.0 Ethernet adapter, 10/100
LM99885-Port Ethernet Switch
ST8010-4JMultiple socket outlet, 6 fold, with illuminated switch
LM9025Interface converter USB/RS485
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8000-4NDisplay for Energy Distribution equipment

Learning Content in Detail

Students learn about the design and operation of double busbars, carry out the switching operations themselves and evaluate the current distribution by measurement.

Analyzing the structure of switchgear

Students analyze the basic circuits and assemblies of three-pole double busbar systems.

Distinguishing between switching devices

Students compare the switching behavior and operating conditions of disconnect switches and circuit breakers.

Carrying out switching operations

Students develop switching algorithms for the incoming feeder, outgoing feeder and bus coupler bays and test them on the system.

Changing busbars without interruption

Students change the supply feeder without interrupting the consumer load.

Coupling busbars

Students control the bus coupler bay, couple two busbars and evaluate the resulting equalizing currents.

Analyzing current distribution

Students measure and compare the load current distribution in different network configurations.

Remote control of the system via SCADA

Students operate and monitor the double busbars over the network using the SCADA software.

Features & Applications

The experiments reflect the operation of switching and transformer substations: load transfers and uninterrupted busbar changeover in a live grid, as well as safe switching operations and protection engineering in high-voltage switchgear.
  • Three-phase double busbars up to 500 V — The system realistically replicates parallel lines with incoming feeder, outgoing feeder and bus coupler bays, with line-to-line voltages of up to 500 V.
  • Uninterrupted busbar changeover — Students transfer loads between the busbars without interrupting the supply to the outgoing feeders.
  • Interlocking logic to prevent incorrect operation — Incorrect switching operations on disconnect switches and circuit breakers are prevented internally and immediately signaled visually and audibly.
  • Protective monitors for automatic fault monitoring — Integrated monitors for overcurrent, overvoltage, phase angle and voltage difference automatically shut down the system when necessary.
  • SCADA connection via Ethernet — The SCADA Viewer supplied allows switching operations, measured values and grid states to be displayed and remotely controlled in real time.
  • Soft PLC to IEC 61131-3 — Students program their own switching algorithms and interlocks across bays in Instruction List or Structured Text.
  • Interactive multimedia course — The course guides users step by step through theory and experiments and tests their knowledge with immediate feedback.
  • Double busbar incoming/outgoing feeder bay (CO3301-5R) — The bay contains two disconnect switches, a 5 A circuit breaker, auxiliary contacts, three-phase current and voltage measurement and an Ethernet interface.
  • Double busbar bus coupler bay (CO3301-5S) — The bus coupler bay connects the two busbars via two disconnect switches and a circuit breaker. This allows bus coupling to be carried out and equalizing currents to be investigated.
  • Power Quality Meter (CO5127-1S) — The digital three-phase meter with graphic display and network analyzer records real, reactive and apparent energy as well as harmonics.
  • Variable three-phase power supply 0–450 V (CO3301-3Z) — This infinitely variable power supply has a variable transformer, analog instruments and miniature circuit breakers.
  • Variable resistive load 1 kW (CO3301-3F) — Three synchronously adjustable toroidal rheostats simulate different consumer loads in wye or delta connection.
  • SCADA Viewer network control software — The software visualizes the switching states in real time, remotely controls the switches and records all electrical grid parameters in digital instruments.
  • SCADA Logger for value and signal acquisition — The logger records analog and digital signals synchronously, displays transients in diagrams and offers measurement and export functions.
  • Integrated soft PLC environment — In the programming environment, students create their own interlocks and automated switching sequences, which then run on the system.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply