Skip to content

Protection for Busbars Systems

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Protection for Busbars Systems

EDP11PT

Training system for busbar protection: participants compare the currents on a double busbar using summation current transformers, distinguish between faults inside and outside the protection zone and parameterize the time-overcurrent relay.

Learning Content
  • Evaluating currents in normal operation
  • Investigating short-circuit currents by measurement
  • Assigning faults to the protection zone
  • Parameterizing the time-overcurrent relay
KEY FEATURES
  • Carrying out switching operations in three ways
  • Cascadable double busbar
  • Hardware and software interlocking to prevent incorrect operation
  • Busbar modules (CO3301-5R, CO3301-5S)
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

In large distribution substations, a fault in an outgoing feeder must not disconnect the entire busbar. Differential protection therefore distinguishes whether a fault lies inside or outside the protection zone. The system puts this principle into practice experimentally: using three summation current transformers, participants compare incoming and outgoing currents and apply Kirchhoff’s current law. They switch single-phase, two-phase and three-phase short circuits, parameterize the time-overcurrent relay and trip the circuit breaker in a targeted way. Switching operations can be carried out by hand, via control inputs or via SCADA. By the end, participants can detect internal faults even when current transformers saturate and assess the stabilization.

CO3301-3ATransmission line Model 150km/300km (93.2miles/186.4miles)
CO3301-5RDouble busbar unit, three-phase, incoming / outgoing feeder
CO3301-3FVariable Ohmic load, three-phase, 1kW
CO3301-3HOhmic load 3x 560 Ohm
CO3301-4YSet of Balancing transformer
CO3301-4JÜberstromzeitrelais
CO3301-5PPower switch module
SO2800-9MInteractive Lab Assistant: Protection for bus bar systems
SO4001-3HSoftware SCADA Viewer
CO3301-3ZAdjustable 3-phase power supply, 0-450V/2A
CO5127-1SThree-phase power quality meter with display and long-term memory
LM9057Patch cable Cat5E 1x 1m yellow, 2x 2m yellow
LM8257USB 2.0 Ethernet adapter, 10/100
LM99885-Port Ethernet Switch
ST8010-4JMultiple socket outlet, 6 fold, with illuminated switch
LM9025Interface converter USB/RS485
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8000-4NDisplay for Energy Distribution equipment

Learning Content in Detail

Participants record the currents in normal operation and in the event of a fault, assign faults to the protection zone and set the protective relay accordingly.

Evaluating currents in normal operation

Participants record the currents on a fault-free double busbar and evaluate the measured values.

Investigating short-circuit currents by measurement

Participants measure the currents during single-phase, two-phase and three-phase short circuits.

Assigning faults to the protection zone

Participants analyze the fault characteristics of short circuits inside and outside the protection zone.

Parameterizing the time-overcurrent relay

Participants set the relay for the specific application and disconnect the system in a targeted way when limit values are exceeded.

Features & Applications

The experiments reflect what happens in distribution substations: protection of double busbars, selective protection using summation current transformers and connection to SCADA telecontrol systems.
  • Carrying out switching operations in three ways — Disconnect switches and circuit breakers can be switched by hand on the device, via 30 V control inputs or via Ethernet from the SCADA software.
  • Cascadable double busbar — The modules can be combined to form any network topology. Participants use them to replicate real switchgear.
  • Hardware and software interlocking to prevent incorrect operation — Impermissible switching operations are blocked and signaled both visually and audibly. This allows participants to try out switching sequences without risk.
  • Busbar modules (CO3301-5R, CO3301-5S) — The modules bring data acquisition and monitoring functions directly into the feeder. Disconnect switches and circuit breakers operate autonomously via pushbuttons on the device or by remote control via the SCADA software.
  • Protective relay (CO3301-4J) — The overload stage and short-circuit stage can be parameterized in an industry-oriented way using software or potentiometers.
  • Summation current transformer set (CO3301-4Y) — The set has three three-phase current connections and determines the differential currents phase by phase.
  • Lucas-Nülle SCADA Viewer — The software controls the system via Ethernet and displays its status. A data logger records measured values for analyzing transients, and a digital set square tool is used to measure graphs. A soft PLC to IEC 61131-3 allows users to create their own sequences.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply