Skip to content

Overcurrent Time Protection for Lines

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Overcurrent Time Protection for Lines

ELP11PT

Equipment set for time-overcurrent protection: students parameterize an industrial protective relay on a three-phase line model, create specific short circuits and measure pick-up values and tripping times.

Learning Content
  • Dimensioning and parameterizing time-overcurrent protection
  • Determining the reset ratio
  • Determining the minimum tripping time
  • Checking circuit breaker tripping
KEY FEATURES
  • Creating short circuits safely
  • Original industrial protective relay
  • Parameterization via SCADA or by hand
  • Electrically isolated transmission via RS485
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Medium-voltage and high-voltage grids are monitored by protective devices via current and voltage transformers. Within this system, time-overcurrent protection provides selective overload and short-circuit protection for radial networks fed from one end: a current well above the operating current causes the relay to pick up, and after the time delay has elapsed, the output relay operates the circuit breaker. The equipment set covers this entire chain, from the variable three-phase power supply and the line model for 150 km or 300 km to the circuit breaker. Students create specific short circuits, determine the reset ratio and minimum tripping time and parameterize the relay by hand or on the PC via the RS485 interface.

CO3301-4JÜberstromzeitrelais
CO3301-3ATransmission line Model 150km/300km (93.2miles/186.4miles)
CO3301-3FVariable Ohmic load, three-phase, 1kW
CO3301-5PPower switch module
SO2800-6LInteractive Lab Assistant: Protective systems for high-voltage transmission line
SO4001-3HSoftware SCADA Viewer
CO3301-3ZAdjustable 3-phase power supply, 0-450V/2A
CO5127-2SPower Quality Meter mit Grafikdisplay und Langzeitspeicher
LM2330Multi13S digital multimeter
LM9057Patch cable Cat5E 1x 1m yellow, 2x 2m yellow
LM8257USB 2.0 Ethernet adapter, 10/100
LM99885-Port Ethernet Switch
ST8010-4JMultiple socket outlet, 6 fold, with illuminated switch
LM9025Interface converter USB/RS485
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8000-4LDisplay for Power Transmission equipment
SO5126-3RSafety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3VSafety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3WSafety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II
SO5148-1LSet of safety measurement cables, 4mm (31 leads)

Learning Content in Detail

Students dimension the time-overcurrent protection, parameterize the relay and verify its behavior in the event of a short circuit by measurement.

Dimensioning and parameterizing time-overcurrent protection

Students learn how to dimension the protection and set the relay accordingly.

Determining the reset ratio

Students determine the reset ratio for single-pole, two-pole and three-pole short circuits.

Determining the minimum tripping time

Students measure the minimum tripping time of the time-overcurrent relay.

Checking circuit breaker tripping

Students check whether the circuit breaker trips in the event of a fault.

Features & Applications

The experiments reflect practical applications: protective devices for medium-voltage and high-voltage grids, and selective overload and short-circuit protection in radial networks fed from one end.
  • Creating short circuits safely — Students deliberately trigger short circuits and use them to test the tripping stages of the protective relay. Users and equipment remain protected at all times.
  • Original industrial protective relay — The protective relays used come from manufacturers operating worldwide and are the same as those installed in real systems.
  • Parameterization via SCADA or by hand — The relay can be set either directly on the device or on the PC via the integrated RS485 interface.
  • Electrically isolated transmission via RS485 — An optical link captures the values and transmits them from the relay to the PC with electrical isolation.
  • Time-overcurrent relay (CO3301-4J) — This three-phase relay detects overloads and can be configured for definite-time (DMT) or inverse-time (IDMT) overcurrent protection with three inverse characteristics.
  • Line model 150 km / 300 km (CO3301-3A) — This three-phase model of a high-voltage overhead line allows measurements under no-load, matched-load and short-circuit conditions.
  • Circuit breaker module (CO3301-5P) — The module switches the voltage on and off manually or by remote control. Indicator lamps show the operating status.
  • Variable resistive load (CO3301-3F) — Three synchronously adjustable toroidal rheostats allow parallel, series, wye and delta connections of up to 1 kW.
  • Variable three-phase power supply 0–450 V / 2 A (CO3301-3Z) — This infinitely variable power supply with variable transformer and motor protection circuit breaker supplies the system safely.
  • SCADA Viewer — The software controls and monitors the system. Measured values are displayed, recorded and evaluated in real time.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply