EPE 51-1 Field-oriented control of asynchronous machine using MATLAB - Simulink 1kW

EPE 51-1 Field-oriented control of asynchronous machine using MATLAB - Simulink 1kW

Three-phase drives are used today in almost all electrical drives. Mathematically the automatic control of such drives is both a complex and costly undertaking. The training system makes it possible to simulate sophisticated control algorithms with the aid of the special toolbox for Matlab®/ Simulink® and subsequently test them by means of automatically generated code on real intrinsically safe hardware incorporating a motor and load.

Training objectives:

  • Setting up a hardware-in-the-loop system under real-time conditions
  • Modelling and designing cascade closed-loop control for a servo motor on an ongoing design level
  • Reducing the control system to discrete components to run on a digital signal processor
  • Creation and optimization of automatic flow-rate and speed controllers
  • Park- and Clarke transformation
  • Integration of the space phasor modulation to optimize the control of the IGBT
  • Speed detection using incremental sensors
  • Comparison of simulation results with actual measurements

Weboffer

 0 Article
Equipment set / product

Basic equipment set, consisting of:
1
Self-commutated converter circuits
Self-commutated converter circuits CO3636-3B
1
USB adapter with MATLAB toolbox for power electronics and process control
 USB adapter with MATLAB toolbox for power electronics and process control CO3636-3D
1
Three-phase asynchronous motor, squirrel-cage, 1 kW, 400/230 V
 Three-phase asynchronous motor, squirrel-cage, 1 kW, 400/230 V SE2683-1S
1
Incremental position encoder 1024 pulses, 1 kW
 Incremental position encoder 1024 pulses, 1 kW SE2683-5T
1
Three-phase isolating transformer 1300VA
Three-phase isolating transformer 1300VA CO3636-3G
1
Coupling guard with LED lighting for 1kW machines
 Coupling guard with LED lighting for 1kW machines SE2662-7D
1
Rubber coupling sleeve for 1kW machines
 Rubber coupling sleeve for 1kW machines SE2662-6A
Media:
1
Interactive Lab Assistant: Frequency converter drives 1kW
 Interactive Lab Assistant: Frequency converter drives 1kW SO2805-2L
1
Interactive Lab Assistant: Field-oriented control using MATLAB-Simulink 1 kW
 Interactive Lab Assistant: Field-oriented control using MATLAB-Simulink 1 kW SO2805-2P
Additionally required, dynamic servo machine test stand:
1
Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E)
 Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E) CO3636-6Y
1
Rubber coupling sleeve for 1kW machines
 Rubber coupling sleeve for 1kW machines SE2662-6A
1
Coupling guard with LED lighting for 1kW machines
 Coupling guard with LED lighting for 1kW machines SE2662-7D
Measuring instruments:
1
Power-Multimeter
 Power-Multimeter CO5127-2A
Accessories:
1
Set of safety measurement cables, 4mm, 31 pcs
 Set of safety measurement cables, 4mm, 31 pcs SO5148-1L
20
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
2
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V
2
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II SO5126-3W
1
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
 SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm ST7200-7A
1
Protected power distribution for working stations
 Protected power distribution for working stations ST8008-8N
Additionally recommended:
1
Display for Power Electronics equipment
 Display for Power Electronics equipment ST8000-5B
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
 Monitor holder for flat screen monitor of weight up to 15kg/33lbs ST8010-4T
1
ST7200-5L