EEM 11.3-3 Energy-savings drives using frequency converters 300W

EEM 11.3-3 Energy-savings drives using frequency converters 300W

 

In almost any mechanical process the need for power varies. In these cases energy efficiency can be boosted to a considerable degree thanks to frequency converters. 

Training objectives:

  • Putting speed-variable drives into operation
  • Investigating the effect of different parameters on the operating response
  • Adapting energy-efficiency to the operating point
  • Drafting energy-efficient motion profiles
  • Taking the efficiency of the entire system into consideration

Weboffer

 0 Article
Equipment set / product

Supplementary set to EEM11.2 Energy-efficient drives, consisting of:
1
Sinamics G120 frequency converter, 0.75 kW, single-phase, PROFINET
 Sinamics G120 frequency converter, 0.75 kW, single-phase, PROFINET CO3636-5N
1
Brake resistor 0.2kW for frequency converters
Brake resistor 0.2kW for frequency converters CO3636-5V
Media:
1
Interactive Lab Assistant: Energy efficient drives 0.3 kW
 Interactive Lab Assistant: Energy efficient drives 0.3 kW SO2805-1J
Additionally required, dynamic servo machine test stand:
1
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo
 Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo CO3636-6X
1
Rubber coupling sleeve for 300W machines
 Rubber coupling sleeve for 300W machines SE2662-2A
1
Coupling guard with LED lighting for 300W machines
 Coupling guard with LED lighting for 300W machines SE2662-7C
Power supply:
1
Three-phase power supply with motor protection switch
 Three-phase power supply with motor protection switch CO3212-5V
Measuring instruments:
1
Power-Multimeter
 Power-Multimeter CO5127-2A
Accessories:
1
Set of safety measurement cables, 4mm, 31 pcs
 Set of safety measurement cables, 4mm, 31 pcs SO5148-1L
20
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
2
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V
2
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II SO5126-3W
1
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
 SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm ST7200-7A
1
Protected power distribution for working stations
 Protected power distribution for working stations ST8008-8N
Additionally recommended:
1
Display for Electrical Machines equipment
 Display for Electrical Machines equipment ST8000-5A
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
 Monitor holder for flat screen monitor of weight up to 15kg/33lbs ST8010-4T
1
Protection cover for three-level experiment trolleys
 Protection cover for three-level experiment trolleys ST7200-5L