Small Wind Power Plant Trainer
Small Wind Power Plant Trainer
PanelTrain system with servo test bench that emulates a small wind turbine: participants wire the energy chain from the generator via the rectifier, charge controller and battery to the off-grid inverter and take measurements throughout.
- Recording generator characteristics by measurement
- Understanding protective mechanisms and diagnosing faults
- Analyzing charge and discharge cycles
- Wiring and commissioning an off-grid system
- Emulating wind scenarios regardless of the weather
- Modular design for step-by-step skills development
- Testing charge management and energy storage
- Analyzing system behavior under changing loads
Small wind turbines of up to 5 kW supply sites located far from the grid. Anyone who installs and operates such systems must master the entire energy chain, but cannot choose the weather for it. A highly dynamic servo test bench therefore emulates real wind conditions in the lab. Participants wire each stage individually, from the synchronous generator via the bridge rectifier and the charge controller with battery to the off-grid inverter, and commission the system. They switch in loads, observe the effect on rotor speed, torque and voltage, and systematically measure voltage, frequency and power. Finally, they set up an off-grid system on their own and locate faults on the running system.
| Base Product | |
| CO3208-3E | Charge controller for small wind generator 12 V |
| SE2683-1M | Synchronous generator 12V for small wind power plant with permanent magnets |
| CO3208-1K | Lamp board 12V |
| CO3208-1J | Load unit 1kOhm, 500W |
| CO3208-1F | Off-grid inverter 230V, 275VA |
| CO3208-4L | Lamp board 230V |
| SO2800-3Q | Interactive Lab Assistant: Small wind power plants |
| Power Supply | |
| CO3212-5V | Three-phase power supply with motor protection switch |
| Measuring Instruments | |
| CO5127-2A | Power-Multimeter |
| Options | |
| CO3208-3F | Small-scale wind turbine 370W, with demonstration mastoptional |
| CO3208-3G | Mast set for small-scale wind turbineoptional |
| Accessories | |
| CO3636-6X | Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo |
| SE2662-2A | Rubber coupling sleeve, 0.3kW |
| SE2662-7C | Coupling guard with LED lighting for 300W machines |
| Furniture | |
| ST7200-7A | SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm |
| ST8010-4T | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | Protection cover for three-level experiment trolleys |
| ST8010-4G | Keyboard adapter for flat screen monitor holders |
| Furniture Accessories | |
| ST8000-4E | Display for Small Wind Turbine equipment |
| Measurement Leads | |
| SO5126-3R | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5148-1L | Set of safety measurement cables, 4mm (31 leads) |
Learning Content in Detail
Recording generator characteristics by measurement
Understanding protective mechanisms and diagnosing faults
Analyzing charge and discharge cycles
Wiring and commissioning an off-grid system
Features & Applications
- Emulating wind scenarios regardless of the weather — The servo test bench safely replicates different weather conditions. Every experiment can be repeated as often as required under the same conditions.
- Modular design for step-by-step skills development — The system is not a closed black box. Participants wire each stage individually, from the synchronous generator via the bridge rectifier to the inverter, and in this way learn how generation, control, storage and inversion interact.
- Testing charge management and energy storage — The charge controller and battery are wired together for real. Participants test the protective functions directly on the system and learn why fluctuating sources in off-grid operation require battery management.
- Analyzing system behavior under changing loads — Participants switch in various loads, such as halogen and LED lamps, and investigate how this affects rotor speed, torque and voltage.
- Safety charge controller with dump load — In an emulated storm, the danger of generator overspeed becomes apparent. In the experiment, participants recognize why active load resistors are needed to protect the system.
- Power multimeter for four measured variables — The instrument replaces four conventional measuring instruments. Participants monitor several variables simultaneously and can also interpret non-sinusoidal signals.
- WindSim software — The PC control with data logger records the measured values. Participants set wind profiles and use them to observe the dynamic behavior of the system.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.