Overvoltage and Undervoltage Protection
Overvoltage and Undervoltage Protection
Equipment set for digital overvoltage and undervoltage protection: students set pick-up values, tripping times and hysteresis separately and test the relay with an infinitely variable three-phase voltage.
- Determining pick-up and drop-off values
- Determining the reset ratio and hysteresis
- Measuring the inherent operating time of the protective relay
- Testing tripping characteristics
- Monitoring overvoltage and undervoltage with one relay
- Setting tripping parameters separately
- Testing pick-up values with variable voltage
- Adjustable switching hysteresis
Voltage relays monitor the operating voltage of a network and protect generators, loads and equipment. Overvoltages damage the insulation of generators and capacitors, while undervoltages put stress on motors. The digital relay records the grid voltages and selectively disconnects endangered parts of the installation via the circuit breaker. With this equipment set, students use the variable three-phase power supply to vary the test voltage continuously and run through the pick-up and drop-off values for overvoltage and undervoltage. They calculate the switching hysteresis from the reset ratio, measure the inherent operating time and pick-up delay and test various tripping characteristics on a three-phase line model.
| Artikel-Nr. | Menge | Bezeichnung |
|---|---|---|
| Base Product | ||
| CO3301-4N | 1 | Time Over- / Undervoltage Relay |
| CO3301-3A | 1 | Transmission line Model 150km/300km (93.2miles/186.4miles) |
| CO3301-3F | 1 | Variable Ohmic load, three-phase, 1kW |
| CO3301-5P | 2 | Power switch module |
| SO2800-6L | 1 | Interactive Lab Assistant: Protective systems for high-voltage transmission line |
| Software | ||
| SO4001-3H | 1 | Software SCADA Viewer |
| Power Supply | ||
| CO3301-3Z | 1 | Adjustable 3-phase power supply, 0-450V/2A |
| Measuring Instruments | ||
| CO5127-2S | 1 | Power Quality Meter mit Grafikdisplay und Langzeitspeicher |
| LM2330 | 1 | Multi13S digital multimeter |
| Accessories | ||
| LM9057 | 1 | Patch cable Cat5E 1x 1m yellow, 2x 2m yellow |
| LM8257 | 1 | USB 2.0 Ethernet adapter, 10/100 |
| LM9988 | 1 | 5-Port Ethernet Switch |
| ST8010-4J | 2 | Multiple socket outlet, 6 fold, with illuminated switch |
| LM9025 | 1 | Interface converter USB/RS485 |
| Furniture | ||
| ST7200-7A | 1 | SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm |
| ST8010-4T | 1 | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | 1 | Protection cover for three-level experiment trolleys |
| ST8010-4G | 1 | Keyboard adapter for flat screen monitor holders |
| Furniture Accessories | ||
| ST8000-4L | 1 | Display for Power Transmission equipment |
| Measurement Leads | ||
| SO5126-3R | 40 | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5126-3V | 10 | Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II |
| SO5126-3W | 10 | Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II |
| SO5148-1L | 1 | Set of safety measurement cables, 4mm (31 leads) |
Learning Content in Detail
Determining pick-up and drop-off values
Determining the reset ratio and hysteresis
Measuring the inherent operating time of the protective relay
Testing tripping characteristics
Features & Applications
- Monitoring overvoltage and undervoltage with one relay — The digital protective relay monitors two-, three- and four-wire systems and also checks the phase sequence.
- Setting tripping parameters separately — Pick-up values and tripping times for overvoltage and undervoltage can be set independently of each other.
- Testing pick-up values with variable voltage — Using the variable three-phase power supply, students continuously ramp the voltage up and down and thus safely test pick-up values and hysteresis.
- Adjustable switching hysteresis — The adjustable hysteresis prevents the relay from picking up and resetting in an uncontrolled manner during voltage fluctuations.
- Overvoltage and undervoltage time relay (CO3301-4N) — This industrial relay monitors the voltage with switching hysteresis and phase sequence monitoring and has an RS485 interface.
- Line model 150 km / 300 km (CO3301-3A) — This three-phase model of an overhead line at a scale of 1:1000 replicates real operating and fault conditions.
- Circuit breaker module (CO3301-5P) — The module switches the voltage manually or by remote control and provides a visual indication of its status.
- Variable resistive load (CO3301-3F) — Synchronously adjustable toroidal rheostats simulate motor starts and load changes in the grid.
- Variable three-phase power supply 0–450 V / 2 A (CO3301-3Z) — This infinitely variable power supply with motor protection circuit breaker and measuring point selector switch provides precise test voltages.
- SCADA Viewer — The software controls and parameterizes the relay and records voltage curves and tripping times in real time.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.