Skip to content

Basic Electronic Circuits

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Basic Electronic Circuits

BEL02ET

EloTrain training system with 4 mm plug-in components: learners build amplifiers, multivibrators, operational amplifiers, signal generators and power controllers and measure them step by step.

Learning Content
  • Analyzing basic transistor circuits
  • Investigating multi-stage amplifiers
  • Evaluating feedback effects
  • Testing multivibrators and memory circuits
KEY FEATURES
  • Testing operational amplifiers and multivibrators
  • Analyzing multi-stage amplifiers and output stages
  • LabSoft course software for experiment guidance
  • Comprehensive set of plug-in components
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Amplifiers, multivibrators, oscillators and power supplies are found in almost every technical device. The training system lets learners build these basic circuits themselves rather than just describe them. Using 4 mm plug-in components on the plug-in board, they create RC-coupled, direct-coupled and Darlington amplifiers, push-pull output stages with crossover distortion, inverting and non-inverting operational amplifiers, differential amplifiers and comparators as well as astable, monostable and bistable multivibrators. These are complemented by rectifiers, voltage stabilization circuits, switching regulators, DC-DC converters and phase-angle controllers with a thyristor and triac. The LabSoft course software guides learners through the experiments with instructions, animations and knowledge checks and saves the measured values.

PS4400-1AEloTrain basic set: Electrical engineering/electronics 4mm, with storage board
CO5127-3LEloTrain case to hold DIN A4 boards for storing plug-in components
SO2804-7JInteractive Lab Assistant: EloTrain Basic electronic Circuits
PS4400-1BEloTrain basic set without board: Electrical engineering/electronics, 4mmoptional
CO3535-5HEloTrain plug-in board 2/4mm, 120 nodes
SO5146-1MEloTrain set of connection cables and plugs for 4mm system
CO3538-8MMulti Power Supply 4x DC, 2x AC, 3-phase, function generator
LM2332Max 10 digital multimeter
LM6210Digital dual trace storage oscilloscope w. colour display, incl. probes 30MHz
LM9032Test lead, BNC/2x 4mm plug, 1.5m

Learning Content in Detail

Learners can build basic analog circuits, measure their parameters and assess the effect of feedback, operating point and external circuitry.

Analyzing basic transistor circuits

Learners measure the voltage gain and phase shift in common-emitter, common-collector, common-source and common-drain circuits.

Investigating multi-stage amplifiers

Learners build two-stage AC voltage amplifiers with capacitive and with direct coupling.

Evaluating feedback effects

Learners compare the effect of negative and positive feedback on gain, bandwidth and signal distortion.

Testing multivibrators and memory circuits

Learners test the switching behavior of astable, monostable and bistable multivibrators for pulse generation.

Wiring operational amplifiers

Learners implement inverting, non-inverting and differential amplifiers with op-amps and determine their dynamic behavior.

Characterizing signal generators

Learners build sawtooth, sine-wave and PWM generators and investigate amplitude and frequency modulation.

Evaluating power supply circuits

Learners investigate half-wave, bridge and three-phase rectifiers as well as voltage stabilization circuits and voltage multipliers.

Building a power controller

Learners control the power in an AC circuit by means of phase-angle control with a thyristor and triac.

Features & Applications

The experiments address the tasks that arise in analog electronics and signal processing, as well as in the maintenance of electronic assemblies.
  • Testing operational amplifiers and multivibrators — Learners build inverting and non-inverting amplifiers, differential amplifiers and comparators and investigate astable, monostable and bistable multivibrators.
  • Analyzing multi-stage amplifiers and output stages — Learners investigate RC-coupled, direct-coupled and Darlington amplifiers and observe the crossover distortion of push-pull output stages.
  • LabSoft course software for experiment guidance — The software provides interactive instructions, animations on the theory and knowledge checks, and saves the measured values automatically.
  • Comprehensive set of plug-in components — Transparent polycarbonate housings with scratch-resistant printed circuit symbols contain resistors, capacitors, coils and semiconductors for building a wide variety of circuits.
  • Investigating power supply and power control — Learners test rectifiers, voltage stabilization circuits, switching voltage regulators, DC-DC converters and phase-angle controllers.
  • Setting operating points for distortion-free amplification — Learners investigate common-emitter, common-collector and FET circuits and set the operating point so that the signal is amplified without distortion.
  • Multi Power Supply as power source — The power supply unit provides fixed and variable DC and AC sources, a function generator and a three-phase generator. All work is carried out at safety extra-low voltage.
  • Gold-plated contacts with touch protection — The gold-plated lamella plugs of the components remain corrosion-free and ensure reliable contact. Plastic sleeves protect learners from touching live parts.
  • Semiconductor components for typical device technology — Diodes, transistors, FETs, thyristors and triacs allow circuits to be built as they are found in many electronic devices.
  • Capturing external oscilloscope images — Learners transfer screenshots of the measured waveforms from the external oscilloscope into the placeholder in the course software, thus documenting their results.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply