Skip to content

Transistor and Amplifier Technology

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Transistor and Amplifier Technology

BEL03UT

Compact computer-based training system for analyzing transistor amplifiers, differential amplifiers and constant current sources. Learners insert Eurocard cards into the Experimenter and take measurements with virtual instruments.

Learning Content
  • Setting the operating point
  • Setting up and analyzing investigating multistage amplifiers
  • Comparing coupling methods
  • Analyzing frequency response
KEY FEATURES
  • “Multi-stage amplifiers” experiment card
  • “Differential amplifier” experiment card
  • Multi-stage transistor amplifiers and coupling methods
  • “Constant current sources” experiment card (SO4201-8G)
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Analog amplifier circuits and precision current sources are found in industrial signal processing, measurement technology and communications electronics. The training system covers the properties, operating point setting and coupling methods of transistor amplifiers, as well as how differential amplifiers and constant current sources work. Using plug-in Eurocard experiment cards, learners build multi-stage amplifiers, carry out frequency response analyses and adjust the offset of the differential amplifier. Faults that can be switched in via relays train fault diagnosis, and LabSoft links the multimedia content with the hands-on experiment. By the end, learners can determine gain, bandwidth and load behavior and can distinguish between the amplifier classes.

CO4204-5HCourse Electronics 3: Transistor and amplifier technology
LM2330Multi13S digital multimeteroptional
CO4203-2AUniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2JUniTrain measurement accessories, shunts and connection cables
CO4203-2YUniTrain storage case for one UniTrain system
CO4203-2BUniTrain Experimenter

Learning Content in Detail

Learners gain an understanding of the operating point, gain and frequency behavior of analog amplifier stages, along with the associated troubleshooting.

Setting the operating point

Learners determine the DC bias and set transistors for linear operation.

Setting up and analyzing investigating multistage amplifiers

Comparing coupling methods

Learners measure the voltage gain with capacitive and with direct coupling between stages.

Analyzing frequency response

Learners determine the lower and upper cut-off frequencies and the bandwidth of multi-stage amplifiers.

Investigating differential amplifiers

Learners compare differential-mode gain and common-mode rejection at varying input levels.

Evaluating constant current sources

Learners measure the load behavior of current-limiting circuits with bipolar transistors and with FETs.

Carrying out fault diagnosis

Learners systematically locate simulated circuit faults using the instruments.

Distinguishing amplifier classes

Learners explain how Class A, Class B, Class C and Class D amplifiers work.

Features & Applications

The experiments address tasks from circuit engineering and electronics development, as well as from the maintenance of electronic assemblies.
  • “Multi-stage amplifiers” experiment card — The board contains two-stage amplifier circuits with capacitive and direct coupling, as well as eight integrated simulated faults that are activated via relays.
  • “Differential amplifier” experiment card — The card provides a discrete differential amplifier with potentiometers for offset adjustment and switches for differential and common-mode operation.
  • Multi-stage transistor amplifiers and coupling methods — Learners compare two-stage amplifiers with capacitive and with direct coupling and determine the overall efficiency and frequency behavior.
  • “Constant current sources” experiment card (SO4201-8G) — The board allows comparative measurements on two discrete constant current sources, one with an FET and one with a bipolar transistor.
  • Integrated, software-controlled troubleshooting — Circuit faults that can be activated via relays simulate realistic malfunctions. Learners narrow them down systematically and thus practice diagnosis on amplifier circuits.
  • Differential amplifiers in differential and common-mode operation — Learners analyze discrete differential amplifiers with symmetrical and with asymmetrical supply and carry out the offset adjustment themselves.
  • Transistor constant current sources — Learners investigate the load behavior and stability of constant current sources with bipolar transistors and with field-effect transistors (FETs).
  • Guided, practical laboratory training — Multimedia content and hands-on experiments on the cards are closely interlinked. This fosters learners’ ability to act independently and competently.
  • Small-signal and AC behavior — Learners analyze small-signal amplifiers under AC voltage excitation and determine AC equivalent parameters and the phase shift of the signal.
  • UniTrain interface — The central measurement and control interface with a 32-bit processor offers six analog differential amplifier inputs and integrated analog outputs for precise signal analysis.
  • Oscilloscope and voltmeters — The 2/4-channel oscilloscope can be used in 2-channel mode together with two voltmeters.
  • Function generator — The function generator produces AC voltage in sine, triangle and square waveforms up to a frequency of 5 MHz.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply