Skip to content

Hazard Alarm and Access Control Systems

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Hazard Alarm and Access Control Systems

ESB41PT

Training system for intrusion alarm, fire alarm and access control technology: learners plan, wire and configure a bus-controlled alarm control panel with four project boards in accordance with DIN VDE 0833 and VdS guidelines.

Learning Content
  • Planning hazard alarm systems
  • Commissioning the alarm control panel
  • Setting up access control systems
  • Securing the building perimeter
KEY FEATURES
  • VdS-compliant bus alarm control panel with LAN and USB
  • RFID access control with Cryplock keypad reader
  • Perimeter and interior monitoring on doors and windows
  • Fire protection with optical and heat detectors
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Residential and commercial buildings need security technology that signals alarms reliably and is demonstrably installed in compliance with standards. This training system covers the complete functional chain: from the bus-controlled alarm control panel and the LCD touch control unit to four project boards for the entrance door and access control, windows and room monitoring, fire detection and technical detectors. Learners wire detector zones, program RFID transponders and Cryplock keypad readers, connect optical smoke detectors, rate-of-rise heat detectors and manual pull stations, and integrate gas and water detectors. Configuration is carried out with the manufacturer’s hipas software, and measurements are taken with the LM8554 multimeter. All work is carried out in accordance with DIN VDE 0833, VdS Classes A, B and C and EN 50131.

CO3109-4QBus-controlled hazard alarm system with LAN and WEB interface
CO3109-4RLCD touch control unit for hazard alarm system
CO3109-4TProject: Outer shell monitoring and access control at an entrance door
CO3109-4UProject: Outer shell and interior monitoring on walls with windows
CO3109-4VProject: Fire detection and alarm with different sensors
CO3109-4WProject: Monitoring of technical installations and manual alarms
SO2801-4RInteractive Lab Assistant: Hazard detection technology
LM8554Voltage, phase + continuity tester with field direction indicator, max. 400V
CO3109-4SAlarm system for visual and audible alarmsoptional
LM9071Patch cable Cat5E 1m, grey
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8000-1BDisplay for Smart Building equipment
SO5126-7V2mm safety measurement cable, 5cm, red, 10A, stackable connector plugs
SO5126-7Y2mm safety measurement cable, 5cm,, white 10A, stackable connector plugs
SO5126-7USicherheitsmessleitung 2mm, 5cm, gelb, 10A, stapelbare Stecker
SO5126-7H2mm safety measurement cable, 30cm, red, stackable connector plugs
SO5126-7K2mm safety measurement cable, 30cm, black, 10A, stackable connector plugs
SO5126-7L2mm safety measurement cable, 30cm, yellow, 10A, stackable connector plugs
SO5126-7P2mm safety measurement cable, 60cm, red, 10A, stackable connector plugs
SO5126-7R2mm safety measurement cable, 60cm, black , 10A, stackable connector plugs
SO5126-7N2mm safety measurement cable, 60cm, yellow, 10A, stackable connector plugs
SO5126-7M2mm safety measurement cable, 60cm, green, 10A, stackable connector plugs
SO5126-4R2mm safety measurement cable, 100cm, red, 10 A
SO5126-4S2mm safety measurement cable, 100cm, black, 10 A,
SO5126-4T2mm safety measurement cable, 100cm, yellow, 10A, stackable plugs

Learning Content in Detail

Learners acquire the practical skills to plan, wire and configure a hazard alarm system in compliance with standards and to test it systematically in the event of a fault.

Planning hazard alarm systems

Learners plan and assess alarm systems, taking the VdS guidelines and DIN VDE standards into account.

Commissioning the alarm control panel

Learners wire, configure and synchronize the CO3109-4Q bus control panel using the hipas software.

Setting up access control systems

Learners program RFID transponders and Cryplock keypad readers to control arming and locking elements.

Securing the building perimeter

Learners install and test magnetic reed contacts, bolt contacts and passive glass-break sensors on windows and doors.

Integrating interior and motion detection

Learners integrate bus motion detectors and vibration sensors and configure detector zones using bus technology.

Installing fire alarm systems

Learners connect optical smoke detectors, rate-of-rise heat detectors and manual pull stations to relay detector bases.

Implementing technical hazard detectors

Learners integrate gas and water detectors as well as panic alarms to detect environmental and personal hazards.

Finding faults and testing the system

Learners analyze Z-wiring, measure terminating resistors with the multimeter and clear fault and tamper messages.

Features & Applications

The system covers three areas of application: securing residential and commercial buildings with intrusion and fire alarm systems with central event management, access control with RFID and electromechanical door locking, and monitoring of gas, water and smoke hazards.
  • VdS-compliant bus alarm control panel with LAN and USB — The control panel handles up to 344 detector zones in 32 logical areas. It meets the requirements of VdS Classes A, B and C and EN 50131.
  • RFID access control with Cryplock keypad reader — Learners program keyless access and arming authorizations via contactless RF transponders and evaluate electromechanical locking elements.
  • Perimeter and interior monitoring on doors and windows — Magnetic reed contacts, bolt contacts, vibration sensors and passive glass-break detectors provide a realistic replica of building security.
  • Fire protection with optical and heat detectors — Learners analyze the physical triggering criteria of smoke and rate-of-rise heat detectors and practice manual alarm activation via manual alarm stations and fire alarm pull stations.
  • Technical hazard detection for gas, water and panic alarms — Sensors for flammable gases and water ingress as well as discreet panic alarms extend the system with building and personal protection functions.
  • Operation via 7-inch touch display and hipas software — Configuration is carried out either via the graphical interface of the touch control unit or on the PC using the manufacturer-specific hipas configuration software.
  • Alarm control panel with integrated web server — The control panel offers 16 integrated detector zones, switching outputs and relay and sounder connections, and can be expanded using bus technology.
  • 7-inch touch LCD control unit with multicolor status display — The control unit provides plain-text operation and menu navigation and monitors up to 32 detection areas, including tamper monitoring.
  • Entrance door function module with locking element — The module demonstrates locking, closing and opening monitoring in conjunction with the Cryplock RF keypad reader and read/write system.
  • Window function module with glass-break and motion sensors — Passive glass-break detectors, vibration sensors and bus motion detectors detect tampering and intrusion attempts.
  • Fire detection function module with relay detector bases — The module contains optical smoke detectors, rate-of-rise heat detectors and separate manual pull stations for the internal alarm and the fire department connection.
  • Technical detectors function module for water, gas and panic alarms — It integrates a gas detector for flammable gases, two-stage water detectors and manually resettable panic alarms.
  • Interactive Lab Assistant — The interactive learning software guides learners step by step through theory, experiment projects and troubleshooting. It provides automatic feedback and documents learning progress.
  • hipas configuration software — Using the manufacturer’s software, learners configure detector zones, forced sequences and communication parameters graphically on the PC.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply