Control Systems and Protective Circuitry



Control Systems and Protective Circuitry
UniTrain system for hard-wired control technology: learners design contactor and relay controls in the software simulator, build 25 projects on the experiment board and work with safety extra-low voltage throughout.
- Applying circuit symbols and drawing rules
- Creating and reading circuit documentation
- Designing hard-wired controls
- Implementing control logic
- 25 practical projects, each with its own overlay mask
- Integrated circuit simulator in LabSoft
- Safe working with safety extra-low voltage
- Wide range of industrial switching and protective devices
Hard-wired controls are the basis for understanding automated systems in electrical and building systems engineering. The UniTrain system teaches the design, commissioning and troubleshooting of contactor and relay controls. Learners first design their circuit in the integrated software circuit simulator and try it out there without risk of damage. They then build the same control on the experiment board with real main contactors, motor protection switches, auxiliary contactors, and timing and impulse relays. 25 practical projects, each with its own overlay mask, lead from simple logic operations through reversing contactor and wye-delta controls to the Dahlander circuit. All experiments run on touch-safe safety extra-low voltage.
| Artikel-Nr. | Menge | Bezeichnung |
|---|---|---|
| Base Product | ||
| CO4204-4N | 1 | Course Installation engineering 2: Control systems/protective circuitry |
| Options | ||
| LM2330 | 1 | Multi13S digital multimeteroptional |
| SO4203-2V | 1 | UniTrain storage case for experiment boardoptional |
| Accessories | ||
| CO4203-2A | 1 | UniTrain Interface mit virtuellen Instrumenten (Basis VI) |
| CO4203-2J | 1 | UniTrain measurement accessories, shunts and connection cables |
| CO4203-2Y | 1 | UniTrain storage case for one system |
| Measurement Leads | ||
| SO5146-1Q | 1 | Cable set 2mm, connection plugs 2/5mm for course CO4204-4N |
Learning Content in Detail
Applying circuit symbols and drawing rules
Creating and reading circuit documentation
Designing hard-wired controls
Implementing control logic
Applying interlocking and sequence circuits
Commissioning reversing contactor controls
Integrating timing and special relays
Building wye-delta starting circuits
Controlling Dahlander motors
Systematic troubleshooting
Features & Applications
- 25 practical projects, each with its own overlay mask — Learners build and understand real control tasks step by step, including pump, fan, crane, gate and machine controls.
- Integrated circuit simulator in LabSoft — Circuit designs can be developed, tried out and tested safely and without risk of damage before they are built on the board.
- Safe working with safety extra-low voltage — All experiments and measurements run on touch-safe safety extra-low voltage.
- Wide range of industrial switching and protective devices — The experiment board is equipped with main and auxiliary contactors, motor protection switches, timing and impulse relays and limit switches.
- Troubleshooting and circuit analysis — Learners systematically acquire the skills to locate faults in main and control circuits.
- Standards-compliant circuit diagram documentation — Learners learn circuit symbols and drawing rules in accordance with DIN VDE 0113 as well as block diagrams and detached circuit diagrams.
- Motor starting and pole-changing controls fully covered — Reversing contactor, wye-delta and Dahlander circuits are covered for different speed and operating modes.
- Experiment board with real industrial components — It carries 4 main contactors, 3 motor protection switches, 2 auxiliary contactors, a universal timing relay and an impulse relay on a compact module.
- 25 precisely fitting project overlay masks — Each mask shows the project-specific assignment of equipment and system symbols on the board.
- Integrated command and signaling devices — The equipment includes an emergency stop mushroom push-button, push-buttons, a manual/automatic switch and 6 colored indicator lights in accordance with the VDE standard.
- Three-phase power supply — Via the LabSoft software, the system generates a touch-safe three-phase supply of 3 x 14 V at 50 Hz.
- Set of measuring leads and bridging plugs — The 2 mm plug-in technology allows clear and fast wiring of the control and main circuits.
- Circuit diagram editor in LabSoft — The software module is used to create, simulate and check circuit diagrams directly on the PC.
- Software circuit simulator — It automatically compares the circuit developed with the stored model solution and gives immediate feedback.
- Virtual measuring instruments and signal generation — Virtual multimeters and control of the three-phase supply voltage are available via the UniTrain interface.


From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.




