Skip to content

Single- and Three-Phase Transformers

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Single- and Three-Phase Transformers

ENT51UT

UniTrain training system with three-limb core transformer: learners configure single-phase, three-phase and autotransformers, investigate vector groups and measure no-load, load and short-circuit conditions.

Learning Content
  • Deriving the operating principle
  • Analyzing the equivalent circuit
  • Evaluating connection types
  • Testing autotransformers
KEY FEATURES
  • Twelve windings for flexible configurations
  • Analyzing vector groups systematically
  • Short-circuit measurement without risk
  • Investigating unbalanced loads
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Transformers make energy transmission economical and supply machines with the right voltage level. The training system leads from the basic principle of electromagnetic induction to the vector groups of three-phase technology. The experiment card carries a transformer with a three-limb core; twelve windings with center taps are individually brought out to 2 mm safety jacks. From these, learners connect single-phase, three-phase and autotransformers, switch between wye, delta and zigzag connections and determine the clock number. Three incandescent lamps serve as the load and indicate the load condition directly. Measurements are made with virtual instruments: no-load, short-circuit voltage, unbalanced load and phase shift. Everything runs at safety extra-low voltage.

CO4204-7YCourse: Single- and Three-phase transformers
CO4203-2AUniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2JUniTrain measurement accessories, shunts and connection cables
CO4203-2YUniTrain storage case for one UniTrain system
CO4203-2BUniTrain Experimenter

Learning Content in Detail

Learners are able to demonstrate the operating principle of the transformer by measurement, evaluate vector groups and determine efficiency.

Deriving the operating principle

Learners measure the transformation ratio and compare the numbers of turns with the voltages induced under no-load conditions.

Analyzing the equivalent circuit

Learners determine the magnetizing reactance and the no-load losses through targeted measurements.

Evaluating connection types

Learners compare wye, delta and zigzag connections under balanced and unbalanced loads.

Testing autotransformers

Learners investigate intrinsic power and throughput power and evaluate their use without galvanic isolation.

Determining efficiency

Learners calculate the ratio between input and output active power, taking copper and iron losses into account.

Features & Applications

The experiments address tasks from electrical drive technology and power engineering in which transformers adapt voltages and currents.
  • Twelve windings for flexible configurations — The card provides twelve windings with center taps. From these, learners configure single-phase, three-phase or autotransformers and switch between experiments without modifying the hardware.
  • Analyzing vector groups systematically — Learners investigate wye, delta and zigzag connections, determine the clock number and capture the phase shift between the primary and secondary sides.
  • Short-circuit measurement without risk — The system works with safety extra-low voltage. Learners measure short-circuit currents and voltages safely and derive the internal resistance from them.
  • Investigating unbalanced loads — Learners deliberately load individual phases with the integrated loads and observe live how this affects the neutral point and the phase voltages.
  • Three-phase transformer with three-limb core — The open design allows experiments on the single-phase transformer as well as the investigation of different vector groups in three-phase operation. Learners analyze the magnetic flux in the iron core and the winding arrangement on an operating transformer.
  • Integrated loads with visible load state — Three incandescent lamps serve as load resistors. Learners see the load state directly and follow how the secondary voltage drops under load.
  • Winding taps on 2 mm safety jacks — All winding ends are brought out individually. Learners wire even complex circuits quickly and safely using plug-in jumpers.
  • LabSoft digital learning environment — The software combines theory and practice. Learners read the instructions, answer interactive tests and save their measurement results directly in the user interface.
  • Virtual oscilloscope — Learners display phase shifts graphically and analyze the voltage and current waveforms over time in single-phase and three-phase operation.
  • Three-phase power supply virtual instrument — Learners control the supply via the PC and adjust voltage and frequency continuously to investigate the behavior of the transformer.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply