Smooth Starting Three-Phase Machines
Smooth Starting Three-Phase Machines
Analyze the dynamic starting behavior of asynchronous motors. Configure ramp-up profiles and simulate real load profiles directly on your PC.
- Comparing starting methods
- Parameterizing the soft starter
- Simulating load profiles
- Visualizing dynamic processes
- Comparing starting methods directly
- Parameterizing industrial soft starters
- Simulating real industrial machines
- Analyzing phase-angle control
Direct grid connection of three-phase asynchronous motors causes extreme current and torque peaks, putting heavy stress on mechanics and power grids. In industrial practice, soft starters use phase-angle control to prevent grid overloads and minimize wear on gears or conveyor belts. With this compact training system, you commission an industrial soft starter. You configure acceleration and deceleration ramps exactly as in practice and actively investigate motor behavior under various load profiles on the PC. This helps learners fully understand the complex interaction between the drive and the driven machine.
| Base Product | |
| CO3636-5Q | Smooth starter industrial type for 3-phase asynchronous machines up to 1kW |
| SE2683-1H | Three-phase asynchronous motor, 0.3 kW n=1400 (230V/400V) |
| CO3212-1W | Cut-out switch, 4 pole |
| SO2805-1S7 | Interactive Lab Assistant: Industrieller Sanftanlauf, 0,3 kW |
| SE2683-1H | Three-phase asynchronous motor, 0.3 kW n=1400 (230V/400V) |
| Power Supply | |
| CO3212-5V7 | Three-phase power supply with motor protection switch |
| Measuring Instruments | |
| CO5127-2A | Power-Multimeter |
| Accessories | |
| CO3636-6X7 | Dynamic servo machine test stand for 300W machines incl. control software ActiveServo 2.0 |
| SE2662-2A | Rubber coupling sleeve, 0.3kW |
| SE2662-7C | Coupling guard with LED lighting for 300W machines |
| Furniture | |
| ST8010-4G | Keyboard adapter for flat screen monitor holders |
| ST8008-8N7 | Protected power distribution for workstations |
| ST8010-4J8 | Multiple power outlet strip, 6 outlets, US-standard |
| Furniture Accessories | |
| ST8000-5C | Display for Drive Technology equipment |
| Measurement Leads | |
| SO5148-1L | Set of safety measurement cables, 4mm (31 leads) |
| SO5126-3R | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5126-3V | Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II |
| SO5126-3W | Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II |
Learning Content in Detail
Comparing starting methods
Parameterizing the soft starter
Simulating load profiles
Visualizing dynamic processes
Features & Applications
- Comparing starting methods directly — Learners compare across-the-line starting with soft starting. They measure the starting currents and evaluate how much the torque peaks are reduced under exactly the same load.
- Parameterizing industrial soft starters — Learners set the ramp-up ramp, ramp-down ramp and starting voltage on the control unit and analyze how the settings affect acceleration and current consumption.
- Simulating real industrial machines — Using the test system, learners emulate load profiles such as a pump, calender or hoist and evaluate the starting behavior under constant and variable loads.
- Analyzing phase-angle control — Learners investigate the voltage reduction by the soft starter, visualize the voltage waveform and assess its quadratic influence on torque.
- Industrial-grade soft starter — Learners operate a real semiconductor motor control unit with bypass contactor and set the start ramp, stop ramp and starting voltage directly on the unit’s potentiometers.
- Three-phase induction motor — The industrial motor drives the system. Its electronic data plate (EDD) transfers the machine data directly to the software and thus supports parameterization.
- Servo machine test system — Control unit and induction servo brake in one system: learners adjust the counter-torque continuously, simulate heavy starting and measure the mechanical variables.
- Tool-free coupling and temperature protection — Learners couple the motor and brake backlash-free using a rubber sleeve, without any tools. A temperature contact protects the machines against thermal overload.
- Shaft cover with safety interlock — The Makrolon cover protects against rotating parts. The status LED only lights up green when there are no faults, and only then does the system enable the power supply.
- Power multimeter with touch display — The measuring instrument records the rms values of voltage, current and power. Via the USB interface, learners can further evaluate the signal waveforms on the PC.
- Interactive Lab Assistant (ILA) — The course software guides learners through all the experiments using multimedia. Learners answer knowledge questions, operate virtual instruments and transfer measured values by drag and drop.
- ActiveServo: analysis and visualization tool — Learners use it to configure the servo test bench, set load parameters for a pump or calender and control the dynamic measurements on the PC.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.