Protection for Electrical Machines 300W
Protection for Electrical Machines 300W
PanelTrain bench-top system with motor protection board, sensor-equipped 0.3 kW induction motor and servo test bench: learners set protective devices and measure their tripping behavior under stall, heavy starting and overload conditions.
- Connecting the induction motor correctly
- Parameterizing protective devices
- Simulating a pump blockage
- Evaluating heavy starting
- Comparing real protection concepts
- Recreating industrial fault scenarios
- Monitoring temperature directly at the winding
- Recording dynamic processes in real time
If a foreign object blocks the circulation pump in a wastewater treatment plant, the protective device decides whether the motor survives. On the bench-top system, learners build the corresponding circuits themselves: the board combines a motor protection circuit breaker, overload relay, thermistor protection relay and load contactors, and the 0.3 kW induction motor is fitted with a PT100, PTC and bimetallic switch. The servo machine test system reproduces stalls and the heavy starting of large flywheel masses, while the software records currents and temperatures live. The multimedia course guides learners through the design of a wastewater treatment plant. By the end, learners can set protective devices to the rated current, measure tripping times and compare them with the manufacturer’s characteristic curve.
| Base Product | |
| SE2682-3Z | Three-phase induction motor with various temperature sensors, 0.3kW |
| CO3213-7X | Board for motor protection systems 300W |
| LM2324 | True RMS digital multimeter |
| SO2805-1F | Interactive Lab Assistant: Protection for electrical machines 0.3 kW |
| Power Supply | |
| CO3212-5V | Three-phase power supply with motor protection switch |
| Measuring Instruments | |
| CO5127-2A | Power-Multimeter |
| Accessories | |
| CO3636-6X | Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo |
| SE2662-2A | Rubber coupling sleeve, 0.3kW |
| SE2662-7C | Coupling guard with LED lighting for 300W machines |
| Furniture | |
| ST7200-7A | SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm |
| ST8010-4T | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | Protection cover for three-level experiment trolleys |
| ST8010-4G | Keyboard adapter for flat screen monitor holders |
| ST8008-8N | Protected power distribution for working stations |
| ST8010-4J | Multiple socket outlet, 6 fold, with illuminated switch |
| Furniture Accessories | |
| ST8000-5A | Display for Electrical Machines equipment |
| Measurement Leads | |
| SO5148-1L | Set of safety measurement cables, 4mm (31 leads) |
| SO5126-3R | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5126-3V | Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II |
| SO5126-3W | Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II |
Learning Content in Detail
Connecting the induction motor correctly
Parameterizing protective devices
Simulating a pump blockage
Evaluating heavy starting
Recording temperature curves
Verifying thermistor protection
Features & Applications
- Comparing real protection concepts — Motor protection circuit breakers, overload relays and evaluation units are combined on a single panel. Learners parameterize these components specifically for individual industrial load profiles and compare the concepts with one another.
- Recreating industrial fault scenarios — The test system emulates blocked pumps or fans. Learners use it to investigate the real behavior of the protective devices.
- Monitoring temperature directly at the winding — The industrial motor has integrated PT100 and PTC sensors and a bimetallic switch. The various protective devices can be tested on one motor while the temperature at the winding is measured at the same time.
- Recording dynamic processes in real time — The software captures motor currents and temperature curves live and records them over time. This lets learners see immediately when a protective device responds.
- Motor protection systems board, 300 W — The panel contains motor protection circuit breakers, overload relays, thermistor protection relays and load contactors. Learners use it to build and compare industrial protection circuits.
- Three-phase induction motor with sensors, 0.3 kW — The IE2 motor has built-in sensors: PT100, PTC and bimetallic switch. An electronic nameplate provides all machine data directly to the test system.
- Servo machine test system as an active brake — A digital control unit, an induction servo motor acting as an active brake and the ActiveServo software make up the test system. Learners operate the drive in four-quadrant mode and emulate up to ten driven machines, such as fans, pumps or flywheel masses.
- TRMS multimeter with data logger — The rugged true RMS multimeter has a data logger function and a USB interface. Learners use it to record currents and temperature values.
- Coupling test object and brake without tools — A coupling sleeve with an internal ring gear connects the motor and brake free of backlash and with vibration damping, entirely without tools. The plug-on shaft cover switches off the supply voltage immediately as soon as it is removed during operation. LEDs indicate the safe system status.
- ActiveServo software — Three views guide users through the machine analysis. Learners record motor characteristics under speed or torque control, define ramp functions and emulate eight driven machines. They superimpose the load characteristic of these machines on the motor characteristic and thus determine the operating point.
- Interactive Lab Assistant — The multimedia course guides learners through the design of a wastewater treatment plant. Learners parameterize the virtual instruments and document the measured tripping times.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.