DC Machines
DC Machines
Compact UniTrain training system for DC and universal machines: learners wire series and shunt connections on the open machine model, adjust the brush rocker and locate inserted faults at safety extra-low voltage.
- Comparing connection types
- Controlling speed and direction of rotation
- Limiting starting and braking currents
- Diagnosing faults
- Open design for understanding the system
- Safe experimentation at safety extra-low voltage
- Analyzing all DC machines in one place
- Adjusting the brush rocker mechanically
DC machines are ideal for demonstrating the basic physical principles of electric drives directly, from the Lorentz force to induction. For service and maintenance, there is the added fact that the commutator, type of connection and brush wear are among the most common sources of faults. On the UniTrain experiment card, the machine is openly visible: learners see the stator, rotor, commutator and carbon brushes, wire series and shunt circuits via 2 mm jacks and rotate the brush rocker during operation. Virtual instruments control and measure from the PC. The software uses relays to insert hidden hardware faults, which learners then locate by measurement. All experiments are carried out at safety extra-low voltage.
| Base Product | |
| CO4204-7R | Course Electric Machines 1: DC machines |
| Accessories | |
| CO4203-2A | UniTrain Interface mit virtuellen Instrumenten (Basis VI) |
| CO4203-2J | UniTrain measurement accessories, shunts and connection cables |
| CO4203-2Y | UniTrain storage case for one UniTrain system |
| CO4203-2B | UniTrain Experimenter |
Learning Content in Detail
Comparing connection types
Controlling speed and direction of rotation
Limiting starting and braking currents
Diagnosing faults
Features & Applications
- Open design for understanding the system — Learners can see inside the electrical machine. The open design makes the interaction between stator, rotor, commutator and carbon brushes easy to understand in practice.
- Safe experimentation at safety extra-low voltage — The system works exclusively with harmless safety extra-low voltage. Learners experiment, measure and wire safely, directly at the workstation.
- Analyzing all DC machines in one place — Series-wound, shunt-wound and universal machines are combined in one system. Learners wire the circuits themselves and compare their different speed and load behavior.
- Adjusting the brush rocker mechanically — Learners intervene mechanically in the machine: they rotate the brush rocker by hand and observe live how commutation affects the speed.
- Systematic troubleshooting — Via the software, the system uses relays to insert real hardware faults, such as winding breaks, without the learners seeing them. Learners measure the signals and use them to develop logical diagnostic strategies.
- DC machine experiment card — The 2-pole stator has separate field windings. Using 2 mm jacks, learners flexibly wire series or shunt connections and measure at the same points.
- Rotor with commutator and carbon brushes — The armature has 12 windings and a real commutator. Learners investigate current transfer through the carbon brushes and adjust the brushes mechanically during operation.
- Stroboscope with bright LED — Learners use the stroboscope to determine the rotor speed optically. From this, they derive the slip of the machine under different parameters.
- Integrated relays and resistors — The card contains switchable starting and braking resistors. Learners use them to investigate the reduction of inrush current and to simulate active braking.
- Integrated temperature monitoring — A temperature sensor monitors the field winding. Learners measure the temperature rise at different currents and avoid thermal overloads.
- LabSoft digital learning environment — The software combines theory and practice. Learners read the instructions, answer interactive tests and save their measurement results directly in the HTML interface.
- Virtual instruments (UniTrain) — Learners control the system entirely from the PC. Virtual voltage sources, motor controls, multimeters and oscilloscopes deliver the measured values in real time.
- Virtual motor control — Learners operate the machine via a virtual control panel. They adjust the armature voltage continuously and switch in the starting resistors via relays.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.