Skip to content

BLDC/Servo Motors

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

BLDC/Servo Motors

EEM81UT

Hands-on training in Course Electric Machines 7: BLDC/servo motors, covering concepts from the UniTrain System, sensors, speed and torque, as well as measurement and testing of rotor configurations.

Learning Content
  • Understanding the commutation principle
  • Adjusting position detection
  • Analyzing energization patterns
  • Optimizing the control
KEY FEATURES
  • Half-open motor unit reveals the interior
  • Adjusting the Hall sensors during operation
  • Fully integrated power stage
  • Experimenting with safety extra-low voltage
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com
 
CO4204-7ZCourse Electric Machines 7: BLDC/servo motors
CO4203-2AUniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2JUniTrain measurement accessories, shunts and connection cables
CO4203-2YUniTrain storage case for one UniTrain system
CO4203-2BUniTrain Experimenter

Learning Content in Detail

Learners are able to explain the electronic commutation of a BLDC motor, adjust the position detection and set the parameters of the speed control.

Understanding the commutation principle

Learners learn how electronic switches replace the mechanical contacts of the commutator.

Adjusting position detection

Learners determine the optimum position of the Hall sensors and analyze their influence on the torque and efficiency of the drive.

Analyzing energization patterns

Learners assign the six switching states of the transistor bridge to the rotor position and measure the block-shaped phase voltage.

Optimizing the control

Learners set the parameters of the cascaded speed control on the PC and investigate the stability of the system during load changes.

Features & Applications

The experiments address tasks from automation technology, electrical drive technology and mechatronics.
  • Half-open motor unit reveals the interior — Learners see the stator and rotor right in front of them and grasp the internal structure and the magnetic interaction on the running motor.
  • Adjusting the Hall sensors during operation — Learners rotate the sensors while the motor is running and experience directly how the commutation instant changes speed and smooth running.
  • Fully integrated power stage — The card contains the complete drive electronics and the sensor evaluation. No additional devices are required for operation.
  • Experimenting with safety extra-low voltage — The system works with safety extra-low voltage. Learners wire and measure without risk, and the mechanical forces are also designed so that they pose no danger.
  • Open BLDC motor unit — Windings and permanent magnets are exposed. Learners investigate cogging torque and induced voltage at different speeds directly on the hardware.
  • Adjustable Hall sensor board — The board can be rotated mechanically around the rotor axis. Learners determine the optimum switching instant for both directions of rotation experimentally.
  • Integrated control electronics instead of a commutator — The microcontroller-controlled stage takes over the function of the mechanical commutator. Learners control the current flow in the three phases via the system and analyze the switching states.
  • LabSoft digital learning environment — The software combines theory and practice. Learners read the instructions, answer interactive tests and save their measurement results directly in the user interface.
  • Servo-Controller Unit — Learners specify the setpoint, direction of rotation and operating mode for torque or speed, activate the electronic brake and follow the state of the electronic switches live.
  • PI speed controller virtual instrument — Learners configure the speed and current controllers on the PC and improve the dynamic behavior of the drive by setting Kp and Ti.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply