Skip to content

Controlling Flow of Power in Meshed Networks

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Controlling Flow of Power in Meshed Networks

EUL71PT

Expansion set for power flow control: students inject additional voltages using in-phase, quadrature and oblique regulation, thereby shifting real and reactive power between parallel lines.

Learning Content
  • Comparing regulated and unregulated infeed
  • Investigating in-phase regulation
  • Investigating oblique regulation
  • Observing and evaluating power flows
KEY FEATURES
  • Targeted power flow control
  • Comparison of unregulated and regulated operation
  • In-phase, quadrature and oblique regulation
  • Digital grid visualization
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

In meshed networks, current flows are distributed according to the impedances of the lines. Without intervention, some paths are overloaded while others have spare capacity. Regulating transformers therefore inject an additional voltage to shift the power flow in a targeted way. This expansion set replicates two parallel 380 kV line paths and feeds them via a three-phase transformer with 400 V and 30 V windings. Students first compare the unregulated case with the regulated case. They then investigate in-phase, quadrature and oblique regulation and measure how the magnitude and phase angle of the additional voltage affect the load current. SCADA for PowerLab records the power flows in both circuits, so that phasor calculations can be checked directly.

CO3301-3NIsolating transformer, Three-phase, 1kW
CO3301-3MConversion station 380 V/110 V
CO3301-3ATransmission line Model 150km/300km (93.2miles/186.4miles)
SO2800-3LInteractive Lab Assistant: High-voltage transmission lines
CO3301-3FVariable Ohmic load, three-phase, 1kW
CO3301-3ECapacitive load, three-phase, 1kW
CO3301-3DInductive load, three-phase, 1kW
CO3301-5PPower switch module
SO4001-3HSoftware SCADA Viewer
CO5127-2SPower Quality Meter mit Grafikdisplay und Langzeitspeicher
CO3301-3ZAdjustable 3-phase power supply, 0-450V/2A
LM9057Patch cable Cat5E 1x 1m yellow, 2x 2m yellow
LM8257USB 2.0 Ethernet adapter, 10/100
LM99885-Port Ethernet Switch
ST8010-4JMultiple socket outlet, 6 fold, with illuminated switch
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8000-4LDisplay for Power Transmission equipment
SO5126-3RSafety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3VSafety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3WSafety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II
SO5148-1LSet of safety measurement cables, 4mm (31 leads)
SO5126-8BSafety measurement cable 4mm, 25cm/10", black, 600V CAT III ~1000V CAT II / 32A
SO5126-8LSafety measurement cable 4mm, 50cm/20", black, 600V CAT III ~1000V CAT II / 32A

Learning Content in Detail

Students work through power flow control, from comparing the types of regulation to verifying the additional voltages by calculation.

Comparing regulated and unregulated infeed

Students measure the load distribution on parallel lines with an unregulated and a regulated feed transformer.

Investigating in-phase regulation

Students inject an in-phase additional voltage and analyze the change in reactive power flows.

Investigating oblique regulation

Students inject a phase-shifted additional voltage and observe the targeted shift in real power.

Observing and evaluating power flows

Students measure real and reactive power on both parallel line circuits and assess their utilization.

Comparing theory and practice

Students verify complex phasor calculations of the additional voltages using the measured values in the SCADA system.

Features & Applications

The experiments follow the tasks of grid operation: influencing power flows in meshed transmission and distribution grids, using regulating transformers with in-phase, quadrature and oblique regulation, and avoiding overloads on parallel circuits.
  • Targeted power flow control — Real and reactive power flows in meshed three-phase networks can be specifically controlled and redirected.
  • Comparison of unregulated and regulated operation — Students compare the load distribution with an unregulated and a regulated transformer side by side.
  • In-phase, quadrature and oblique regulation — Students investigate how the magnitude and phase angle of the additional voltage change the load current of parallel lines.
  • Digital grid visualization — SCADA for PowerLab records all voltage and current vectors on the transmission lines in real time.
  • Isolation transformer, three-phase, 1 kW (CO3301-3N) — The transformer feeds the line model. It has windings for 3 x 400 V and 3 x 30 V in vector group Dyn5.
  • Line models (CO3301-3A) — Two three-phase 380 kV overhead line modules represent the parallel paths in the meshed transmission grid.
  • Power Quality Meter (CO5127-1S) — The meters record real, reactive and apparent power as well as phase angles at the feed and load nodes and output them via Ethernet.
  • Transformer substation 380 V/110 V (CO3301-3M) — The 400 VA three-phase transformer with vector group YNyn0 couples the two voltage levels in the interconnected grid.
  • SCADA for PowerLab software — The software displays the meshed network in a digital system diagram, for example as EUL7.pvc, and records the power flows live.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply