Skip to content

Power Grid Synchronization 300W

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Power Grid Synchronization 300W

EEM52PT-7-300W

Teach secure grid synchronization and how to control active and reactive power. This complete training system perfectly prepares your students for power plant operations.

Learning Content
  • Checking the synchronization conditions
  • Connecting the generator using lamp circuits
  • Working with a synchroscope and double instruments
  • Setting real and reactive power
KEY FEATURES
  • Lamp circuits and synchroscope compared
  • Complete sequence through to grid operation
  • Generator unit made up of three coordinated components
  • Synchronizing unit with all measuring instruments
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

A generator may only be connected to the grid when its voltage, frequency and phase angle match those of the grid. If any of these quantities deviates, there is a risk of serious damage to the machine and disturbances in the grid. The training system makes this process easy to follow in the laboratory: the servo machine test system drives the three-phase synchronous machine like a turbine, and the synchronizing unit provides the control station with a lamp circuit, double voltmeter, double frequency meter and synchroscope. Learners match the conditions step by step, determine the switching instant and connect the generator manually. They then vary the drive torque and excitation and observe how the real and reactive power change.

CO3212-6V6Synchronization Unit
CO3212-1J7Motor protection switch, 0.7 - 1A
SE2682-3Q7Three-phase synchronous machine, 0,3 kW
CO3301-5GExciter voltage controller with de-excitation
SO2805-1G7Interactive Lab Assistant: Sync. machines, synchronization 0.3 kW
CO3212-5V7Three-phase power supply with motor protection switch
CO5127-2APower-Multimeter
CO3636-6X7Dynamic servo machine test stand for 300W machines incl. control software ActiveServo 2.0
SE2662-2ARubber coupling sleeve, 0.3kW
SE2662-7CCoupling guard with LED lighting for 300W machines
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8008-8N7Protected power distribution for workstations
ST8010-4J8Multiple power outlet strip, 6 outlets, US-standard
ST8000-5ADisplay for Electrical Machines equipment
SO5148-1LSet of safety measurement cables, 4mm (31 leads)
SO5126-3RSafety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3VSafety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3WSafety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II

Learning Content in Detail

By the end, learners can connect a synchronous generator to the grid in accordance with the three synchronization conditions and operate it in parallel with the grid.

Checking the synchronization conditions

Learners use the measuring instruments of the synchronizing unit to check that voltage, frequency and phase angle match.

Connecting the generator using lamp circuits

Learners synchronize to the infinite bus using the dark-lamp, bright-lamp and rotating-lamp methods and determine the correct switching instant.

Working with a synchroscope and double instruments

Learners carry out instrument-assisted synchronization and evaluate its advantages over the lamp circuits.

Setting real and reactive power

Learners vary the drive torque and excitation and observe the effect on real and reactive power during under-excitation and over-excitation.

Features & Applications

The training system covers the process that takes place when generators are connected in power plants and in on-board power systems, and takes it further through to power control on the grid.
  • Lamp circuits and synchroscope compared — Learners try out the dark-lamp, bright-lamp and rotating-lamp methods and compare them with the instrument-assisted method using the synchroscope. They see how accurate each method is and where its limits lie.
  • Complete sequence through to grid operation — After connection, the generator remains on the grid. Learners set the real power via the prime mover and the reactive power via the excitation controller. This shows how drive power and excitation interact.
  • Generator unit made up of three coordinated components — The prime mover, synchronous generator and control station together form a laboratory-scale power plant unit. Learners adjust the speed of the prime mover while keeping an eye on the synchronizing instruments.
  • Synchronizing unit with all measuring instruments — The 3-lamp circuit, double voltmeter, double frequency meter, synchroscope and synchronizing switch are clearly arranged on one panel. Learners work through the synchronization conditions step by step and connect the generator.
  • Synchronous generator with accessible excitation winding — The three-phase synchronous machine has a cylindrical rotor and converts the mechanical energy of the prime mover into electrical energy. The stator and excitation winding are brought out to touch-proof 4 mm sockets.
  • Servo machine test system in the role of the turbine — The test system drives the generator. Learners fine-tune the speed to reduce the beat frequency and, after synchronization, vary the torque to control the real power.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply