Automatic Synchronising Circuits, Automatic Power Control and Auto Power Factor
Automatic Synchronising Circuits, Automatic Power Control and Auto Power Factor
Automatic grid synchronization, active power and power factor (cos-phi) control.
- Setting up automatic synchronization
- Setting and evaluating the real power controller
- Programming the cos φ controller
- Industry-standard parameterization with a PC tool
- Experiencing controller dynamics first-hand
- Grid support through automatic cos φ control
- CO3301-5W digital multifunction relay
Distributed generation plants and smart grids require precise, automated synchronization and generator control so that the grid remains stable even with fluctuating loads. The training system replicates this task using industrial technology: a multifunction relay handles grid connection, real power control and cos φ control, a generator HMI displays grid and generator values, and the servo machine test stand supplies the drive torque. Participants configure the relay using the manufacturer’s software, change controller parameters such as the gain factor Kp and immediately observe how the settling time and disturbance compensation shift. They then deliberately operate the generator over-excited or under-excited and support the grid with reactive power.
| Base Product | |
| CO3301-5W | Multifunktionsrelais, Leistungsregler, cos-phi Regler, Synchronisiergerät |
| SO2800-3T7 | Interactive Lab Assistant: Netzsynchronisation und Generatorregelung |
| SE2682-5Q7 | Three-phase synchronous machine with smooth core rotor, 1kW |
| CO3301-5G8 | Exciter voltage controller with de-excitation |
| CO3212-1P7 | Motor protection switch, 3 pole, 2,8-4A; US Version |
| CO3301-5L | HMI (Human Machine Interface) for generators |
| Software | |
| SO4001-3H | Software SCADA Viewer |
| Power Supply | |
| CO3212-5V7 | Three-phase power supply with motor protection switch |
| Accessories | |
| LM9057 | Patch cable Cat5E 1x 1m yellow, 2x 2m yellow |
| LM8257 | USB 2.0 Ethernet adapter, 10/100 |
| LM9988-8 | 5-Port Ethernet Switch (International) |
| ST8010-4J8 | Multiple power outlet strip, 6 outlets, US-standard |
| CO3636-6Y7 | Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E) |
| SE2662-7D | Coupling guard with LED lighting for 1kW machines |
| SE2662-6A | Rubber coupling sleeve, 1kW |
| Furniture | |
| ST8010-4G | Keyboard adapter for flat screen monitor holders |
| ST8008-8N7 | Protected power distribution for workstations |
| ST8010-4J8 | Multiple power outlet strip, 6 outlets, US-standard |
| Furniture Accessories | |
| ST8000-4J | Display for Power Generation equipment |
| Measurement Leads | |
| SO5126-9J | Safety measurement cable 4mm, 150cm/60", brown, 600V CAT III ~1000V CAT II / 32A |
| SO5126-9N | Safety measurement cable 4mm, 150cm/60", grey, 600V CAT III ~1000V CAT II / 32A |
| SO5126-9K | Safety measurement cable 4mm, 150cm/60", blue, 600V CAT III ~1000V CAT II / 32A |
Learning Content in Detail
Setting up automatic synchronization
Setting and evaluating the real power controller
Programming the cos φ controller
Features & Applications
- Industry-standard parameterization with a PC tool — The system uses a real industrial multifunction relay, configured via the manufacturer’s software. Participants work with real user interfaces, alarm lists and configuration files.
- Experiencing controller dynamics first-hand — By deliberately changing controller parameters such as the gain factor Kp, participants observe in real time how the settling time, sensitivity and disturbance compensation of the real power and cos φ control change.
- Grid support through automatic cos φ control — Participants test how the cos φ controller adjusts the excitation current and brings about over-excitation or under-excitation. The system’s response shows how the generator supports the grid with inductive or capacitive reactive power.
- CO3301-5W digital multifunction relay — The industrial device acts as the control center of the setup. Participants practice the entire process at a single interface: frequency and phase matching, distribution of real and reactive power, and acknowledging alarms.
- CO3301-5L generator HMI — The operator panel displays all grid and generator parameters in a menu-driven format using the consumer reference arrow system. Participants read real and reactive power directly on the control station device and evaluate how the automation responds to deviations in parallel operation.
- Manufacturer’s parameterization and analysis software — The software serves as a remote control and parameterization tool for the multifunction relay. Participants read out real-time values and alarm status, adjust dead bands and gain factors, safely provoke malfunctions and manage parameter files.
- SCADA Viewer — The Viewer serves as a virtual control station for higher-level control. It records dynamic load changes and control processes in the logger, and the charts can be exported for evaluation.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.