Automate Order-Based Assembly of Workpiece Upper Sections
Automate Order-Based Assembly of Workpiece Upper Sections
Teach automated assembly of different product variants. Your students program order-based selection and assembly of workpiece upper sections and control the processes in TIA Portal.
- Understanding variant assembly
- Programming the order decision
- Switching dual assembly valves
- Adjusting approach times
- Assembling two top part variants in one station
- Selective pneumatic control
- Monitoring the fill levels of both shafts separately
- Recipe-controlled assembly sequence
How can different product variants be assembled automatically on a single production line? This dual mechatronic subsystem helps you teach your students how production orders control the selection and assembly of workpiece components. Students program variant-specific assembly of upper sections and coordinate individual assembly steps with workpiece transport.
The subsystem integrates into IMS and IMU conveyor lines. Two separate stack magazines hold different workpiece upper sections. Four solenoid valves control two independently operating pairs of stoppers and assembly latches. Two photoelectric sensors monitor material levels in each magazine independently. Eight input and output signals connect to the controller through a 25-pin D-sub interface module.
Your students develop a sequence control program in TIA Portal that selects the appropriate magazine based on production order data. They position the workpiece carrier beneath the selected magazine using a two-stage stopper approach at reduced conveyor speed and control the assembly of the corresponding upper section. They learn to evaluate order bits and coordinate material feeding, positioning, and assembly operations. This helps you strengthen their understanding of flexible assembly processes and develop practical skills in programming and controlling manufacturing systems that handle multiple product variants.
| Base Product | |
| LM9515 | Cyber physical conveyor system with PLC |
| SO6200-2P | QuickChart IMS 1.5 Cyber-physical conveyor belt system |
| LM9532 | Film, for oscilloscope cameratype LM 7000 |
| LM9672 | DC power supply 24V/5A for IMS conveyor belts |
| LM9646 | Assembly double station |
| LM9066 | Interface cable 25-pin, Sub-D socket / plug 1m |
| SO6200-2R | QuickChart IMS 4d Mechatronics Assembly double station |
| Media | |
| PAT050001C | RXLea Content CIS01IS: Inbetriebnahme eines cyberphysischen Systems |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PAT050002C | RXLea Content CIS01IS: Grundlagen der SPS Programmierung |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PAT050003C | RXLea Content CIS01IS: Geschwindigkeitskontrolle mit PWM |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PAT050004C | RXLea Content CIS01IS: Analogwertverarbeitung in der SPS |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| Course | |
| SO2805-5X | Interactive Lab Assistant: Self-commutated converter circuits |
| Accessories | |
| LM9677 | IMS displacement measurement module |
| LM8257 | USB 2.0 Ethernet adapter, 10/100 |
| LM9716 | Set of Allen keys |
| LM9521 | Workpiece, top section, white |
| LM9522 | Workpiece, top section, black |
| LM9524 | Workpiece, bottom section, white |
| Furniture | |
| ST7200-7A | SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm |
| ST8010-4T | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | Protection cover for three-level experiment trolleys |
Learning Content in Detail
Understanding variant assembly
Programming the order decision
Switching dual assembly valves
Adjusting approach times
Processing dual fill levels
Structuring function blocks for double stations
Extending system libraries
Validating assembly processes
Features & Applications
- Assembling two top part variants in one station — Two separate magazine shafts hold different top parts. Depending on the order, the station places the matching variant on the bottom part without the line having to be retooled.
- Selective pneumatic control — Four solenoid valves control two independent pairs of stoppers and assembly pawls. This allows the workpiece carrier to be locked precisely beneath shaft A or shaft B.
- Monitoring the fill levels of both shafts separately — Two light barriers record the material stock in each shaft individually. If the program calls up an empty shaft, the monitoring function blocks the call.
- Recipe-controlled assembly sequence — The PLC program reads the order bits and then controls the approach position, creep speed and assembly cylinder accordingly.
- Compact Sub-D signal bundling — All eight I/O signals of the double assembly station are routed via the 25-pin Sub-D transfer module with reverse-polarity protection. The connection to the controller therefore consists of a single connector.
- Two stack magazines, A and B — The two magazines hold different top parts and keep them ready for customer-specific assembly orders.
- Pneumatic assembly pawls — Two 3/2-way solenoid valves actuate the pawls. Depending on the order selection, they join the top part from magazine 1 or magazine 2.
- Pneumatic stoppers — Two 4/2-way solenoid valves lower the stopper cylinders and stop the workpiece carrier beneath the selected assembly position.
- Cylinder switches for the upper stopper end position — The switches signal the upper end position of both stopper cylinders. Only this feedback enables the belt to move.
- Light barriers for fill level detection — The light barriers optically detect the stock in shafts A and B and prevent assembly cycles without material.
- 25-pin transfer module (-X1) — The module transmits the four actuator and four sensor signals of the double assembly station to the controller.
- Siemens TIA Portal — Engineering software for variable-based step sequences, data blocks and creep speed parameters.
- Interactive Lab Assistant course SO2805-5X — Interactive learning software with step-by-step instructions for programming double assembly stations.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.