IMU with Subsystem Drilling and Milling
IMU with Subsystem Drilling and Milling
Hands-on training in IMU with drilling and milling Subsystem, covering Hardware components, Basics TIA Portal, Programming basics PLC, Basic elements, Memory blocks, Time blocks, Counter, Touch panel programming and Use of a PWM signal.
- Hardware components
- Basics TIA Portal
- Programming basics PLC
- Basic elements
- PLC requirements
- Milling spindle, 5,000 – 20,000 rpm
- Control console with the following components
- Valve block 5 x 4/2-way solenoid valves
A workpiece carrier with the bottom part of a workpiece is placed on the conveyor belt. The drilling and cutting station has a controllable cutting head which reams out the internal contour of the workpiece section. The cutting head can be moved in three axes in order to work on the component. Afterwards the workpiece carrier with its workpiece is moved to the end of the conveyor belt to be passed on to the next sub-system.
| Base Product | |
| LM9536 | Industrial Mechatronic Unit |
| LM9532 | Film, for oscilloscope cameratype LM 7000 |
| SO6200-2U | QuickChart, IPA 1 Compact station (GB) |
| LM9688 | Testing station |
| LM9066 | Interface cable 25-pin, Sub-D socket / plug 1m |
| SO6200-1X | QuickChart IMS13 - Drilling and milling station |
| Course | |
| SO2805-5J | Interactive Lab Assistant: IMU 1 Industrial Mechatronic Unit |
| SO2805-5X | Interactive Lab Assistant: Self-commutated converter circuits |
| Accessories | |
| LM9524 | Workpiece, bottom section, white |
| LM9525 | Workpiece, bottom section, black |
Learning Content in Detail
Hardware components
Learners work on hardware components.
Basics TIA Portal
Learners work on basics TIA Portal.
Programming basics PLC
Learners work on programming basics PLC.
Basic elements
Learners work on basic elements.
Memory blocks
Learners work on memory blocks.
Time blocks
Learners work on time blocks.
Counter
Learners work on counter.
Touch panel programming
Learners work on touch panel programming.
Use of a PWM signal
Learners work on use of a PWM signal.
Step chain programming
Learners work on step chain programming.
Features & Applications
- PLC requirements — PLC requirements: 8 x digital outputs, 11 x digital inputs, 1 x analog output for speed (can also be controlled via potentiometer)
- Milling spindle, 5,000 – 20,000 rpm — Milling spindle, 5,000 – 20,000 rpm, controlled by 0...10 V internally or externally
- Control console with the following components — Control console with the following components: Selector switch for speed setting Potentiometer Indicator light Emergency stop with indicator light
- Valve block 5 x 4/2-way solenoid valves — Valve block 5 x 4/2-way solenoid valves
- PLC port via 25-pin SUB-D connector — PLC port via 25-pin SUB-D connector
- Potentiometer for internal speed setting — Potentiometer for internal speed setting
- Milling feed cylinder, Z-axis — Milling feed cylinder, Z-axis

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.