Skip to content

Active Power Factor Correction PFC

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Active Power Factor Correction PFC

EPE20UT

A UniTrain course on active PFC: learners compare the B2 bridge with a boost converter switching at 100 kHz, shape the input current sinusoidally and evaluate harmonics and power factor using FFT.

Learning Content
  • Analyzing the PFC principle
  • Optimizing current draw
  • Evaluating the power balance
KEY FEATURES
  • Dual topology design for direct comparison
  • Integrated loads for dynamic load changes
  • High-frequency PFC control electronics
  • Safe experimenting at safety extra-low voltage
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Complex loads do not draw a sinusoidal current from the grid. The resulting harmonics increase the reactive power and place a burden on the supply grid; standard limits have been set for devices in this respect. The UniTrain course shows how active power factor correction counteracts this. The B2 bridge, storage inductor and MOSFET switch are located on one card, allowing learners to compare uncontrolled rectification and the PFC stage directly without any rewiring. They connect integrated load resistors, check control stability during load changes and optimize the cascaded control system. Using the real-time FFT tool, they break the current down into its harmonic components, determine the distortion factor and calculate the power factor. This makes visible what active current shaping achieves in the grid.

Artikel-Nr.MengeBezeichnung
CO4204-7Q1Course Power electronics 4: Active power factor correction PFC
CO4203-2A1UniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2J1UniTrain measurement accessories, shunts and connection cables
CO4203-2Y1UniTrain storage case for one system
CO4203-2B1UniTrain Experimenter

Learning Content in Detail

Learners acquire the skills to assess grid disturbances and reduce them in a targeted manner by means of active power factor correction.

Analyzing the PFC principle

Learners examine why correction is necessary to avoid grid disturbances and system overloads.

Optimizing current draw

Learners use the boost converter to shape a sinusoidal input current that matches the voltage waveform.

Evaluating the power balance

Learners determine the distortion reactive power and calculate the power factor λ, taking the harmonics into account.

Features & Applications

The experiments focus on two fields in which grid disturbances must be limited: electrical drive technology and power supply design.
  • Dual topology design for direct comparison — A single card holds the B2 bridge and the PFC stage. Learners measure the power factor of both topologies against each other as a reference, without modifying the circuit.
  • Integrated loads for dynamic load changes — Switchable high-power resistors are part of the hardware. Learners carry out dynamic load changes and investigate control stability without external components.
  • High-frequency PFC control electronics — The module contains a real boost converter switching at 100 kHz. Learners analyze the current waveform and energy storage directly on the circuit.
  • Safe experimenting at safety extra-low voltage — All the power electronics work at safety extra-low voltage. Learners handle power semiconductors without risk and can concentrate on signal analysis.
  • Active power factor correction experiment card — The card combines the B2 bridge, storage inductor and MOSFET switch. All relevant potentials are accessible via 2 mm jacks and can be picked up with the oscilloscope.
  • Integrated load resistors — Two thermally stable resistors serve as the experimental load. Learners connect them in series or in parallel and check the behavior at different current levels.
  • Precision shunt module — The current can be recorded directly or measured via the shunt module, so that learners can display current waveforms on the oscilloscope.
  • LabSoft digital learning environment — The software combines theory and experiment: learners read instructions, answer interactive tests and save their measurement results directly in the HTML interface.
  • Virtual PFC analyzer — Learners control the hardware parameters interactively, use digital filters to analyze signal peaks and make the effect of active current shaping visible.
  • Real-time FFT tool — The software breaks the measured signals down into their harmonic components. Learners evaluate the total harmonic distortion (THD) and check compliance with industrial standard limits.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply