Skip to content

IMU with Subsystem Processing with Double Magazine

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

IMU with Subsystem Processing with Double Magazine

CIU5dIU

Using the double processing subsystem, the mobile Industrial Mechatronic Unit press-fits two different pin types from separate magazines. The pin type is specified by the order on the touch panel.

Learning Content
  • Understanding multi-variant processing
  • Programming the order decision
  • Switching dual pneumatic valves
  • Adjusting approach times
KEY FEATURES
  • Press-fitting two pin types according to the order
  • Selectively controlling four pneumatic valves
  • Order selection on the touchscreen
  • Dual level monitoring
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Multi-variant production requires processing stations that can switch between two materials without retooling. The double processing subsystem does exactly that: two chute magazines hold metal and plastic pins, four solenoid valves control two pairs of stoppers and press cylinders, and two light barriers report the stock level of each chute individually. On the KTP700 touch panel, operators select the pin type and follow the sequence. In TIA Portal, learners evaluate the recipe bits, match travel times and creep phases to both chute positions and test the result with changing order data.

Downloads

Find the matching downloads for this product here.
Artikel-Nr.MengeBezeichnung
LM95361Industrial Mechatronic Unit
LM95321Film, for oscilloscope cameratype LM 7000
SO6200-2U1QuickChart, IPA 1 Compact station (GB)
LM96471Processing double station
LM90661Interface cable 25-pin, Sub-D socket / plug 1m
SO6200-2S1QuickChart, IPA 1 Compact station (GB)
SO2805-5J1Interactive Lab Assistant: Self-commutated converter circuits
SO2805-5X1Interactive Lab Assistant: Self-commutated converter circuits
LM95251Workpiece, bottom section, black
LM95211Workpiece, top section, white
LM95273Bolt workpiece, metal
LM95283Bolt workpiece, plastic

Learning Content in Detail

Learners work through multi-variant processing: from evaluating the order data and controlling the pneumatics through to validating the finished sequence.

Understanding multi-variant processing

Learners analyze the design and control of flexible double processing stations.

Programming the order decision

Learners evaluate recipe bits and use them to control the carrier approach and press-fitting at chute A or B.

Switching dual pneumatic valves

Learners control four solenoid valves to actuate stoppers and press cylinders selectively.

Adjusting approach times

Learners set travel times and creep phases precisely for the positions of both chutes.

Implementing touchscreen visualization

Learners design HMI screens for entering order data and displaying magazine levels.

Structuring function blocks for double stations

Learners develop extended function blocks with order flags and decoupled sequences.

Extending system libraries

Learners store blocks for double processing stations in global TIA libraries.

Validating press-fit processes

Learners test selective processing in TIA Portal while changing the order data.

Features & Applications

The unit covers automation technology, flexible joining and processing technology, and industrial control technology.
  • Press-fitting two pin types according to the order — Two separate magazine chutes allow different types of metal or plastic pins to be press-fitted, depending on the order.
  • Selectively controlling four pneumatic valves — Four solenoid valves control two independent pairs of stoppers and press cylinders and lock the carrier precisely beneath chute A or B.
  • Order selection on the touchscreen — Using the KTP700 touch panel, operators select the pin type to be processed and monitor the process steps.
  • Dual level monitoring — Two light barriers record the material stock in each chute separately and block requests when material runs short.
  • DC motor with incremental encoder — The drive enables speed-controlled conveyor movements and position measurements via pulse evaluation. Using PWM, the belt can be moved at different speeds.
  • Siemens S7-1215C with digital module — The PLC provides the extended I/Os needed to control two press-fit units and the conveyor drive synchronously.
  • SIMATIC KTP700 Basic Panel (CO3713-4Q) — The panel displays processing orders and magazine levels and allows the pin type to be selected manually.
  • Two chute magazines, A and B — The magazines hold different pins, for example made of aluminum and plastic, for customer-specific press-fit orders.
  • Pneumatic press cylinders — Depending on the order selected, the cylinders press the pin from magazine 1 or magazine 2 into the workpiece.
  • IO-Link with RFID head and ultrasonic sensors — An RFID read/write head for sending data to the workpiece carrier and ultrasonic sensors for precisely determining the magazine fill levels are connected via an IO-Link master module.
  • 25-pin transfer module (-X1) — The module bundles the sensor and actuator signals as well as the power supply of the double station and transmits them while preventing incorrect connection.
  • Siemens TIA Portal and WinCC — Engineering software for variable-based step sequences, function blocks with order flags and touchscreen displays.
  • Interactive Lab Assistant course SO2805-5J — Interactive learning software with step-by-step instructions for programming double processing stations.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply