Automatically Press-Fitting Pins into Workpiece Housings
Automatically Press-Fitting Pins into Workpiece Housings
Teach automated joining processes through hands-on training. Your students learn to program pneumatic operations in TIA Portal and understand how sensors and actuators work together.
- Analyzing joining processes
- Controlling the press cylinder
- Evaluating cylinder end positions
- Designing sequential controls
- Press-fitting pins in a controlled manner
- Monitoring both cylinder end positions
- Monitoring the magazine optically
- Detecting the magazine fill level
With this subsystem, you can teach your students how mechanics, pneumatics, sensors, and control technology work together in an automated joining process. Your students program the process sequence in TIA Portal, evaluate sensor signals, and coordinate pneumatic movements.
The subsystem integrates into IMS and IMU conveyor lines. A pneumatic stopper positions the workpiece carrier beneath the press-fitting station. A pneumatic cylinder then presses a brass or plastic pin from the supply magazine into the prepared hole in the workpiece housing. Two magnetic cylinder sensors detect the home and pressing positions, while a retroreflective photoelectric sensor monitors pin availability.
Your students develop the required sequence control program, process sensor signals, and adjust cylinder speed using flow control valves. By systematically troubleshooting cylinder sensors and control programs, they strengthen their diagnostic skills. This helps you build practical competencies in commissioning, monitoring, and optimizing automated assembly processes.
| Base Product | |
| LM9515 | Cyber physical conveyor system with PLC |
| SO6200-2P | QuickChart IMS 1.5 Cyber-physical conveyor belt system |
| LM9532 | Film, for oscilloscope cameratype LM 7000 |
| LM9672 | DC power supply 24V/5A for IMS conveyor belts |
| LM9682 | Processing station |
| LM9066 | Interface cable 25-pin, Sub-D socket / plug 1m |
| SO6200-1E | QuickChart, IMS 5 Mechatronics Process subs-system (GB) |
| Media | |
| PAT050001C | RXLea Content CIS01IS: Inbetriebnahme eines cyberphysischen Systems |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PAT050002C | RXLea Content CIS01IS: Grundlagen der SPS Programmierung |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PAT050003C | RXLea Content CIS01IS: Geschwindigkeitskontrolle mit PWM |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PAT050004C | RXLea Content CIS01IS: Analogwertverarbeitung in der SPS |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| Course | |
| SO2805-5X | Interactive Lab Assistant: Self-commutated converter circuits |
| Accessories | |
| LM9677 | IMS displacement measurement module |
| LM8257 | USB 2.0 Ethernet adapter, 10/100 |
| LM9716 | Set of Allen keys |
| LM9521 | Workpiece, top section, white |
| LM9525 | Workpiece, bottom section, black |
| LM9527 | Bolt workpiece, metal |
| LM9528 | Bolt workpiece, plastic |
| Furniture | |
| ST7200-7A | SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm |
| ST8010-4T | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | Protection cover for three-level experiment trolleys |
Learning Content in Detail
Analyzing joining processes
Controlling the press cylinder
Evaluating cylinder end positions
Designing sequential controls
Integrating magazine monitoring
Creating modular function blocks
Adjusting flow control valves
Diagnosing faults systematically
Features & Applications
- Press-fitting pins in a controlled manner — The subsystem pushes pins from the supply magazine into the prepared bore in the housing with a precise fit and controlled cylinder force.
- Monitoring both cylinder end positions — Two magnetic cylinder switches monitor the home position and the extended press position of the working cylinder.
- Monitoring the magazine optically — A retro-reflective light barrier with reflector detects whether at least one press-fit pin has been loaded, preventing failed attempts when the chute is empty.
- Detecting the magazine fill level — An IO-Link ultrasonic sensor detects the fill level of the magazine. The number of pins loaded can be derived from this data.
- Standardized system coupling — All four sensor signals and both actuator signals of the processing station are routed via the 25-pin Sub-D transfer module, which prevents incorrect connection.
- Magazine for press-fit pins — The magazine stores aluminum or plastic pins and feeds them to the press-fitting mechanism.
- 3/2-way solenoid valve for the press cylinder — The valve actuates the pneumatic press cylinder, which presses the pin into the bore in the housing.
- 4/2-way solenoid valve for the stopper — The valve lowers the stopper cylinder and holds the workpiece carrier exactly beneath the press-fitting position.
- Suitable for IMS and IMU conveyor belts — The station can be mounted on an IMS or IMU conveyor belt in just a few steps. All that is then needed to commission it is the 25-pin Sub-D cable to the conveyor and the compressed-air connection.
- Siemens TIA Portal — The engineering environment is used to create blocks, step sequences and signal logic for the joining process.
- Interactive Lab Assistant course SO2805-5X — The interactive learning software contains 3D system models, instructions on step sequences and automatic knowledge tests.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.