Power Semiconductors for AC Voltage Applications
Power Semiconductors for AC Voltage Applications
A UniTrain course on thyristors, triacs and solid-state relays: learners record characteristics, test leading-edge and trailing-edge phase control on resistive, inductive and capacitive loads and locate inserted faults.
- Recording semiconductor characteristics
- Applying control methods
- Analyzing switching behavior
- Diagnosing faults
- All important power semiconductors in a compact arrangement
- Integrated fault simulation
- Visual load indication
- Safe experimenting at safety extra-low voltage
Dimming and switching in AC circuits rely on controllable power semiconductors. In practice, knowing how they work is not enough: skilled technicians must master their switching behavior with inductive and capacitive loads and be able to pinpoint faults in control circuits. The UniTrain course replicates this on a small scale. One card carries a thyristor, triac, power diode, MOSFET and solid-state relay, while the load card carries resistive, capacitive and inductive loads with LED indication of the current direction. Learners record characteristics, set the firing angle and pulse type on the digital firing pulse generator and compare leading-edge with trailing-edge phase control. When the system inserts a component fault, they locate it through targeted signal measurements.
| Base Product | |
| CO4204-5N | Course Electronics 6.1: Power semiconductors for AC voltage applications |
| Accessories | |
| CO4203-2A | UniTrain Interface mit virtuellen Instrumenten (Basis VI) |
| CO4203-2J | UniTrain measurement accessories, shunts and connection cables |
| CO4203-2Y | UniTrain storage case for one UniTrain system |
| CO4203-2B | UniTrain Experimenter |
Learning Content in Detail
Recording semiconductor characteristics
Applying control methods
Analyzing switching behavior
Diagnosing faults
Features & Applications
- All important power semiconductors in a compact arrangement — The card combines a thyristor, triac, diode, MOSFET and solid-state relay. Learners compare the components directly and use them to dim and switch realistic AC loads.
- Integrated fault simulation — The system uses software to insert real component faults. Learners systematically locate defects in the rectification through targeted signal measurements.
- Visual load indication — LEDs on the load card indicate current direction and intensity. Learners recognize the switching behavior directly on the setup.
- Safe experimenting at safety extra-low voltage — All the power electronics work at safety extra-low voltage. Learners handle power semiconductors without risk and can concentrate on signal analysis.
- Galvanic signal isolation — Control is provided via pulse transformers and optocouplers. Learners use this to grasp the electrical isolation between control and load circuits.
- Power semiconductor card — The card combines a thyristor, triac, power diode and MOSFET solid-state relay. Learners investigate the different firing conditions directly on the hardware.
- Complex load card — The module provides resistive, capacitive and inductive loads. Learners use it to replicate real lighting scenarios with electronic or conventional transformers.
- Shunt resistor — Precision shunts enable indirect current measurement. Learners capture currents safely via the oscilloscope and make phase shifts visible.
- LabSoft digital learning environment — The software combines theory and experiment: learners read instructions, answer interactive tests and save their measurement results directly in the HTML interface.
- Digital firing pulse generator — Learners set the firing angle and pulse type, single or multi-pulse, directly on the PC and optimize the control of inductive loads in real time.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.