Self-Commutated Power Converters
Self-Commutated Power Converters
A UniTrain course with a three-phase MOSFET bridge: learners generate variable voltages using pulse-width modulation, compare block, sinusoidal and space vector modulation and evaluate the harmonics using FFT analysis.
- Understanding the PWM principle
- Evaluating modulation types
- Analyzing four-quadrant operation
- Optimizing the switching frequency
- All-in-one platform for all operating modes
- Safe training hardware
- Intuitive hardware visualization
- Software-controlled signal multiplexer
Pulse-width modulation is the basis of any efficient energy conversion with fast switching operations. In industry, self-commutated power converters use it to control motor speeds and to feed energy from DC sources into the grid. The UniTrain course makes this comprehensible on a short-circuit-proof, fully controlled 3-phase MOSFET bridge with a DC link of up to 48 V. LEDs show the switching states of the MOSFETs, while the RL load card uses an LED matrix to visualize the position and intensity of the rotating field vector. Learners set the switching frequency, modulation type and modulation index on the virtual PWM controller, operate loads in all four quadrants and follow the energy being fed back into the DC link. A signal multiplexer eliminates the need for rewiring.
| Base Product | |
| CO4204-7M | Course Power electronics 2: Self-commutated power converters |
| Accessories | |
| CO4203-2A | UniTrain Interface mit virtuellen Instrumenten (Basis VI) |
| CO4203-2J | UniTrain measurement accessories, shunts and connection cables |
| CO4203-2Y | UniTrain storage case for one UniTrain system |
| CO4203-2B | UniTrain Experimenter |
Learning Content in Detail
Understanding the PWM principle
Evaluating modulation types
Analyzing four-quadrant operation
Optimizing the switching frequency
Features & Applications
- All-in-one platform for all operating modes — The system covers all operating modes, from the simple DC chopper to space vector modulation. Learners use a single hardware platform for all of them.
- Safe training hardware — Learners experiment on a short-circuit-proof, fully controlled 3-phase MOSFET bridge at safety extra-low voltage and test real PWM methods without any safety risk.
- Intuitive hardware visualization — Integrated LEDs signal the switching states of the MOSFETs and the rotating field vector live. Learners grasp the physical processes immediately.
- Software-controlled signal multiplexer — Learners capture several voltages and currents simultaneously without rewiring. This reduces setup time and prevents connection errors.
- Self-commutated power converters experiment card — The card contains six MOSFET transistors and a voltage DC link of up to 48 V. It has an integrated microcontroller and is overload-protected.
- RL load experiment card — The module combines resistors and inductors with an LED matrix. Learners see the position and intensity of the rotating field vector in real time.
- Integrated measurement data multiplexer — The multiplexer provides access to numerous measuring points in the circuit. Learners display several signals together and can thus determine operating behavior and timing precisely.
- LabSoft digital learning environment — The software combines theory and experiment: learners read instructions, answer interactive tests and save their measurement results directly in the HTML interface.
- PWM controller virtual instrument — Learners configure the switching frequency and modulation type, such as sinusoidal or block commutation, and optimize the modulation index in real time using sliders.
- Real-time FFT analysis — The tool calculates the harmonic spectrum instantly. Learners compare the signal quality of the different modulation methods mathematically.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.