Skip to content

Control Systems and Protective Circuitry

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Control Systems and Protective Circuitry

EST11UT

UniTrain system for hard-wired control technology: learners design contactor and relay controls in the software simulator, build 25 projects on the experiment board and work with safety extra-low voltage throughout.

Learning Content
  • Applying circuit symbols and drawing rules
  • Creating and reading circuit documentation
  • Designing hard-wired controls
  • Implementing control logic
KEY FEATURES
  • 25 practical projects, each with its own overlay mask
  • Integrated circuit simulator in LabSoft
  • Safe working with safety extra-low voltage
  • Wide range of industrial switching and protective devices
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Hard-wired controls are the basis for understanding automated systems in electrical and building systems engineering. The UniTrain system teaches the design, commissioning and troubleshooting of contactor and relay controls. Learners first design their circuit in the integrated software circuit simulator and try it out there without risk of damage. They then build the same control on the experiment board with real main contactors, motor protection switches, auxiliary contactors, and timing and impulse relays. 25 practical projects, each with its own overlay mask, lead from simple logic operations through reversing contactor and wye-delta controls to the Dahlander circuit. All experiments run on touch-safe safety extra-low voltage.

Artikel-Nr.MengeBezeichnung
CO4204-4N1Course Installation engineering 2: Control systems/protective circuitry
LM23301Multi13S digital multimeteroptional
SO4203-2V1UniTrain storage case for experiment boardoptional
CO4203-2A1UniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2J1UniTrain measurement accessories, shunts and connection cables
CO4203-2Y1UniTrain storage case for one system
SO5146-1Q1Cable set 2mm, connection plugs 2/5mm for course CO4204-4N

Learning Content in Detail

The training leads from standards-compliant circuit diagrams through control logic, interlocks and timing relays to the wye-delta starting circuit and systematic troubleshooting.

Applying circuit symbols and drawing rules

Learners apply standardized symbols and drawing rules in accordance with DIN VDE 0113.

Creating and reading circuit documentation

Learners analyze block diagrams as well as assembled and detached circuit diagrams.

Designing hard-wired controls

Learners plan contactor and relay controls and test them in the circuit simulator.

Implementing control logic

Learners build AND, OR and NOT operations as well as self-holding (latching) circuits on the board.

Applying interlocking and sequence circuits

Learners wire contactor and push-button interlocks to prevent short circuits.

Commissioning reversing contactor controls

Learners implement direction-of-rotation controls for motors with different types of interlocking.

Integrating timing and special relays

Learners use on-delay and off-delay timing relays as well as impulse relays in sequential controls.

Building wye-delta starting circuits

Learners wire and test manual and automatic wye-delta changeover.

Controlling Dahlander motors

Learners carry out pole changing for two-stage speed control.

Systematic troubleshooting

Learners locate and eliminate faults in main and control circuits.

Features & Applications

The system covers the control of induction motors in industrial and building systems, for example for pumps, fans, conveyor belts, lifting gates and machine tools, as well as hard-wired contactor and relay controls in building installation and plant engineering.
  • 25 practical projects, each with its own overlay mask — Learners build and understand real control tasks step by step, including pump, fan, crane, gate and machine controls.
  • Integrated circuit simulator in LabSoft — Circuit designs can be developed, tried out and tested safely and without risk of damage before they are built on the board.
  • Safe working with safety extra-low voltage — All experiments and measurements run on touch-safe safety extra-low voltage.
  • Wide range of industrial switching and protective devices — The experiment board is equipped with main and auxiliary contactors, motor protection switches, timing and impulse relays and limit switches.
  • Troubleshooting and circuit analysis — Learners systematically acquire the skills to locate faults in main and control circuits.
  • Standards-compliant circuit diagram documentation — Learners learn circuit symbols and drawing rules in accordance with DIN VDE 0113 as well as block diagrams and detached circuit diagrams.
  • Motor starting and pole-changing controls fully covered — Reversing contactor, wye-delta and Dahlander circuits are covered for different speed and operating modes.
  • Experiment board with real industrial components — It carries 4 main contactors, 3 motor protection switches, 2 auxiliary contactors, a universal timing relay and an impulse relay on a compact module.
  • 25 precisely fitting project overlay masks — Each mask shows the project-specific assignment of equipment and system symbols on the board.
  • Integrated command and signaling devices — The equipment includes an emergency stop mushroom push-button, push-buttons, a manual/automatic switch and 6 colored indicator lights in accordance with the VDE standard.
  • Three-phase power supply — Via the LabSoft software, the system generates a touch-safe three-phase supply of 3 x 14 V at 50 Hz.
  • Set of measuring leads and bridging plugs — The 2 mm plug-in technology allows clear and fast wiring of the control and main circuits.
  • Circuit diagram editor in LabSoft — The software module is used to create, simulate and check circuit diagrams directly on the PC.
  • Software circuit simulator — It automatically compares the circuit developed with the stored model solution and gives immediate feedback.
  • Virtual measuring instruments and signal generation — Virtual multimeters and control of the three-phase supply voltage are available via the UniTrain interface.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply