Skip to content

Pumped Storage and Various Power Plants

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Pumped Storage and Various Power Plants

EUK11PT-7

Students learn to emulate complex power plant operations realistically. Control automatic grid synchronization, active/reactive power regulation, and load/storage management for stable grids and renewable energy integration.

Learning Content
  • Synchronizing manually and automatically
  • Controlling real and reactive power in the interconnected grid
  • Distinguishing power plant types by measurement
  • Controlling pumped storage operation
KEY FEATURES
  • Simulating and comparing power plant characteristics
  • Understanding pumped storage operation in practice
  • Fully automatic power control in the control station
  • Multifunction relay for protection and control
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

The expansion of renewable energy calls for flexible storage such as pumped storage power plants and precise management of different power plants to keep the grid in balance. The complete laboratory replicates this operation. The servo machine test stand takes on the role of the turbine and emulates the start-up ramps, mechanical inertia and load gradients of gas, coal, biogas and nuclear power plants. Students synchronize the synchronous generator fully automatically via the multifunction relay. They control real and reactive power in load-following mode and run the machine in pumping and turbine mode. This makes it measurable how quickly each plant type responds to load changes.

CO3301-5PPower switch module
CO3301-3FVariable Ohmic load, three-phase, 1kW
CO3301-3DInductive load, three-phase, 1kW
SO2800-3V7Interactive Lab Assistant: Pumpspeicherkraftwerk
SO2800-3W7Interactive Lab Assistant: Power Plants
CO3301-5WMultifunktionsrelais, Leistungsregler, cos-phi Regler, Synchronisiergerät
SO2800-3T7Interactive Lab Assistant: Netzsynchronisation und Generatorregelung
SE2682-5Q7Three-phase synchronous machine with smooth core rotor, 1kW
CO3301-5G8Exciter voltage controller with de-excitation
CO3212-1P7Motor protection switch, 3 pole, 2,8-4A; US Version
CO3301-5LHMI (Human Machine Interface) for generators
CO3301-3FVariable Ohmic load, three-phase, 1kW
CO3301-3ECapacitive load, three-phase, 1kW
CO3301-3DInductive load, three-phase, 1kW
CO3301-5PPower switch module
CO3212-6V2Synchronization Unit
SO4001-3HSoftware SCADA Viewer
CO3212-5V7Three-phase power supply with motor protection switch
CO5127-2SPower Quality Meter mit Grafikdisplay und Langzeitspeicher
LM9057Patch cable Cat5E 1x 1m yellow, 2x 2m yellow
LM8257USB 2.0 Ethernet adapter, 10/100
LM9988-85-Port Ethernet Switch (International)
ST8010-4J8Multiple power outlet strip, 6 outlets, US-standard
CO3636-6Y7Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E)
SE2662-7DCoupling guard with LED lighting for 1kW machines
SE2662-6ARubber coupling sleeve, 1kW
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8008-8N7Protected power distribution for workstations
ST8010-4J8Multiple power outlet strip, 6 outlets, US-standard
ST8000-4JDisplay for Power Generation equipment
SO5126-9JSafety measurement cable 4mm, 150cm/60", brown, 600V CAT III ~1000V CAT II / 32A
SO5126-9NSafety measurement cable 4mm, 150cm/60", grey, 600V CAT III ~1000V CAT II / 32A
SO5126-9KSafety measurement cable 4mm, 150cm/60", blue, 600V CAT III ~1000V CAT II / 32A

Learning Content in Detail

Students take the generator from automatic connection to automatic power control and assign the plant types to their roles in grid operation.

Synchronizing manually and automatically

Students safely connect a synchronous generator to the grid using conventional methods and fully automatically via a multifunction relay.

Controlling real and reactive power in the interconnected grid

Students control real power via the drive torque and reactive power via the excitation voltage according to grid requirements.

Distinguishing power plant types by measurement

Students differentiate between base-load, intermediate-load and peak-load power plants on the basis of start-up times and load gradients and evaluate their role in the grid.

Controlling pumped storage operation

Students run the plant in pumping and turbine mode, thereby automatically compensating for fluctuations in grid load.

Configuring the SCADA system and relay together

Students coordinate automatic synchronization and load-following control in the simulated interconnected grid.

Using reactive power compensation in a targeted way

Students stabilize the voltage and the grid through over-excitation and under-excitation under different load conditions.

Features & Applications

The experiments cover the emulation and control of conventional and renewable power plant types in load-following mode, energy storage in pumped storage power plants, the configuration of multifunction relays and the use of SCADA systems.
  • Simulating and comparing power plant characteristics — The system emulates the start-up times, minimum loads and load gradients of gas, coal and biogas power plants. Students learn how quickly each plant type responds to load fluctuations and classify them as base-load, intermediate-load or peak-load plants.
  • Understanding pumped storage operation in practice — The synchronous machine runs as a motor in pumping mode and as a generator in turbine mode, accompanied by the SCADA storage characteristics. Students follow how surplus energy is stored and released again at peak load.
  • Fully automatic power control in the control station — The multifunction relay and the higher-level SCADA system adjust the plant to external power requirements. The dynamic real and reactive power flows at the balancing point can be followed live.
  • Multifunction relay for protection and control — The relay is the central intelligence of the setup. Students configure it using the manufacturer’s software for automatic synchronization, cos φ control and the individual protection functions.
  • Servo machine test system as turbine simulation — The test system drives the synchronous generator with high dynamics and takes on the role of the steam, gas or water turbine. The SCADA software emulates the start-up ramps, mechanical inertia and maximum drive power of the selected power plant type.
  • Excitation voltage controller with protective function — The controller regulates the generator voltage and immediately de-excites the machine in the event of faulty synchronization, for example when connecting with a large phase difference. This removes the energy source of the short-circuit current, so that dangerous equalizing currents do not occur.
  • SCADA for PowerLab as a virtual power plant control room — The software replicates the control room of a power plant or a grid control center. Students visualize and control all power plant and grid parameters in real time, control real and reactive power in load-following mode via the integrated soft PLC and record dynamic processes.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply