Power Semiconductors for DC Voltage Applications
Power Semiconductors for DC Voltage Applications
A UniTrain course on power control of DC loads: learners try out pulse-width modulation on a MOSFET, IGBT and solid-state relay, operate a 4Q H-bridge and locate inserted faults with the oscilloscope.
- Applying the PWM principle
- Analyzing semiconductor characteristics
- Assessing motor control
- Performing troubleshooting
- Industry-standard power semiconductors in typical circuits
- Real industrial loads
- Software-controlled fault simulation
- Electrically isolated current measurement
MOSFETs and IGBTs switch at high frequencies with low losses. This is the basis for pulse-width modulation in motor controls, heating systems and LED lighting. In practice, it is not enough to operate 4Q choppers and solid-state relays; diagnosing their faults requires in-depth expertise. The UniTrain course brings both together: an experiment card carries MOSFETs, an IGBT, a solid-state relay and a 4Q H-bridge, while the load card holds a DC geared motor, a Peltier element and LEDs. Learners record characteristics, change the PWM frequency and duty cycle and observe directly how speed, heat and brightness respond. Via the UniTrain bus, the system inserts component faults, which learners narrow down by measuring signals – at safety extra-low voltage throughout.
| Base Product | |
| CO4224-5Q | UniTrain-Lab: Power Semiconductors for DC Applications |
| PDT014001C | RXLea Content EPE15UT: Aufbau und Funktionsweise von IGBTs |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PDT014002C | RXLea Content EPE15UT: MOSFET-Transistoren in der Leistungselektronik |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| PDT014003C | RXLea Projekt EPE15UT: Solid-State-Relais für Gleichspannungsanwendungen |
| SW00001 | Software RX Lea |
| SW00019 | Software LN Installer |
| Accessories | |
| CO4203-2A | UniTrain Interface mit virtuellen Instrumenten (Basis VI) |
| CO4203-2J | UniTrain measurement accessories, shunts and connection cables |
| CO4203-2Y | UniTrain storage case for one UniTrain system |
| CO4203-2B | UniTrain Experimenter |
Learning Content in Detail
Applying the PWM principle
Analyzing semiconductor characteristics
Assessing motor control
Performing troubleshooting
Features & Applications
- Industry-standard power semiconductors in typical circuits — The card combines MOSFETs, an IGBT, a solid-state relay and a 4Q H-bridge in industry-standard circuits. Learners compare the components directly and drive real DC loads at high frequency.
- Real industrial loads — Learners control a DC geared motor, a Peltier element for generating heat and cold, and LEDs. In doing so, they observe the effects of the PWM frequency directly.
- Software-controlled fault simulation — Via the UniTrain bus, the system inserts defective components. Learners narrow down the faults in the H-bridge by taking systematic oscilloscope measurements.
- Electrically isolated current measurement — A Hall sensor measures the current without distortion. Learners measure load currents precisely without affecting the control circuit.
- Semiconductor experiment card — The card combines N-channel and P-channel MOSFETs, IGBTs and solid-state relays. Learners examine high-side and low-side driver configurations directly on the hardware.
- Multifunctional load card — The module offers rotating, optical and thermal loads. Learners analyze how the pulse width affects the speed or the thermal inertia of the temperature.
- Integrated fault insertion circuit — Concealed relays activate hardware faults in the 4Q chopper. Learners practice industrial troubleshooting at safety extra-low voltage.
- LabSoft digital learning environment — The software combines theory and experiment: learners read instructions, answer interactive tests and save their measurement results directly in the HTML interface.
- Digital pulse generator — Learners set the PWM frequency, duty cycle and signal type and follow in real time how the switching affects current smoothing.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.