Design of Photovoltaic Systems in an Isolated Power Network
Design of Photovoltaic Systems in an Isolated Power Network
Plan, size and commission complete stand-alone PV systems: learners understand every step of self-sufficient energy supply, from the solar cell to the finished system.
- Analyzing the fundamentals of photovoltaic cells and modules
- Connecting and evaluating solar modules
- Sizing a stand-alone photovoltaic system
- Building and commissioning a stand-alone photovoltaic system
- Analyzing interconnection and shading
- Analyzing DC/AC conversion and evaluating its efficiency
- Measuring and balancing energy flows in storage operation
- Project-based learning: planning a complete stand-alone system
Stand-alone photovoltaic systems are a key technology for locations without access to the public grid. This Lucas-Nülle training system enables learners to experience the entire engineering process in a practical way, from analyzing solar irradiance to designing the right battery storage. They learn how to plan, size and commission self-sufficient power supply systems for vacation homes, measuring stations or mobile applications. The system provides a complete set of practical training equipment for investigating individual solar cells in detail and for building complete self-sufficient systems with energy storage and a 230 V inverter. The success of such systems depends on careful planning and sizing – and these are exactly the skills you teach with this system.
Downloads
| Base Product | |
| CO3208-2A | Solar charge controller 12V, 30A |
| CO3208-1E | Solar Accumulator 12V, 7Ah |
| CO3208-1F | Off-grid inverter 230V, 275VA |
| CO3208-1K | Lamp board 12V |
| CO3208-4L | Lamp board 230V |
| CO3208-1J | Load unit 1kOhm, 500W |
| SO2800-6Q | Interactive Lab Assistant: Photovoltaic systems - Advanced course |
| CO3208-1A | Solar module simulation model, 3-fold, 23V / 2A |
| Measuring Instruments | |
| CO5127-2A | Power-Multimeter |
| Options | |
| CO3208-1X | Solar module with adjustable angle of inclinationoptional |
| SO5148-2B | Set of safety measurement cables 4mm, 10m, 4 pcsoptional |
| Furniture | |
| ST7200-7A | SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm |
| ST8010-4T | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | Protection cover for three-level experiment trolleys |
| ST8010-4G | Keyboard adapter for flat screen monitor holders |
| Furniture Accessories | |
| ST8000-4F | Display for Photovoltaic Advanced equipment |
| Measurement Leads | |
| SO5126-3R | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5126-3U | Safety connecting plug 4mm with tap (2x), red, 1000V/32A CAT II |
| SO5126-3V | Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II |
| SO5126-3W | Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II |
| SO5148-1L | Set of safety measurement cables, 4mm (31 leads) |
| SO5126-8K | Safety measurement cable 4mm, 50cm/20", red, 600 V CAT III ~1000V, CAT II / 32 A |
Learning Content in Detail
Analyzing the fundamentals of photovoltaic cells and modules
Connecting and evaluating solar modules
Sizing a stand-alone photovoltaic system
Building and commissioning a stand-alone photovoltaic system
Determining the efficiency of DC/AC converters
Drawing up energy balances for self-sufficient systems
Features & Applications
- Analyzing interconnection and shading — This system enables a fundamental analysis of series and parallel connections of solar modules. Learners investigate the drastic effects of partial shading and the function of bypass diodes. This helps them avoid hotspots and minimize power losses.
- Analyzing DC/AC conversion and evaluating its efficiency — Learners analyze the stand-alone inverter, which converts the battery’s 12 V DC voltage into 230 V AC voltage for standard household appliances. They check the quality of the sinusoidal voltage and the efficiency in order to optimize the system’s function and take conversion losses into account during planning.
- Measuring and balancing energy flows in storage operation — The system enables a detailed analysis of the energy flows in a stand-alone system, including battery cycles under different operating conditions. Balancing these flows illustrates the principle of energy storage: decoupling generation and consumption over time.
- Project-based learning: planning a complete stand-alone system — Learners plan a realistic project: the self-sufficient power supply for a vacation home. Step by step, they size the solar generator and battery capacity based on specific requirements and then put the system into practice.
- Variable solar module emulation for system experiments — The solar module emulator with three independent modules delivers reproducible measurement results because it is decoupled from real sunlight. Learners investigate irradiance levels, set up interconnections, simulate partial shading and test the protective function of switchable bypass diodes.
- Universal power multimeter — The power multimeter is the central true RMS analysis tool for precise energy evaluation of system components, even with non-sinusoidal voltages. Record all relevant electrical quantities – voltage, current and characteristic curves – using PC-based instruments.
- Intelligent battery management with a maximum power point tracking (MPPT) charge controller — The solar charge controller protects the solar battery against deep discharge and overcharging. As an MPP tracker, it ensures that the solar modules always operate at the optimum operating point in order to achieve the maximum energy yield. A display shows the operating mode and measured values graphically.
- XY plotter: virtual characteristic curve recorder — The XY plotter, the PC software of the power multimeter, visualizes the relationship between two electrical quantities in real time. Learners record I-V and power (P-V) curves, determine the maximum power point (MPP) and analyze interconnections and shading effects.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.