IMU with Subsystem Processing with Double Magazine
IMU with Subsystem Processing with Double Magazine
Using the double processing subsystem, the mobile Industrial Mechatronic Unit press-fits two different pin types from separate magazines. The pin type is specified by the order on the touch panel.
- Understanding multi-variant processing
- Programming the order decision
- Switching dual pneumatic valves
- Adjusting approach times
- Press-fitting two pin types according to the order
- Selectively controlling four pneumatic valves
- Order selection on the touchscreen
- Dual level monitoring
Multi-variant production requires processing stations that can switch between two materials without retooling. The double processing subsystem does exactly that: two chute magazines hold metal and plastic pins, four solenoid valves control two pairs of stoppers and press cylinders, and two light barriers report the stock level of each chute individually. On the KTP700 touch panel, operators select the pin type and follow the sequence. In TIA Portal, learners evaluate the recipe bits, match travel times and creep phases to both chute positions and test the result with changing order data.
Downloads
| Artikel-Nr. | Menge | Bezeichnung |
|---|---|---|
| Base Product | ||
| LM9536 | 1 | Industrial Mechatronic Unit |
| LM9532 | 1 | Film, for oscilloscope cameratype LM 7000 |
| SO6200-2U | 1 | QuickChart, IPA 1 Compact station (GB) |
| LM9647 | 1 | Processing double station |
| LM9066 | 1 | Interface cable 25-pin, Sub-D socket / plug 1m |
| SO6200-2S | 1 | QuickChart, IPA 1 Compact station (GB) |
| Course | ||
| SO2805-5J | 1 | Interactive Lab Assistant: Self-commutated converter circuits |
| SO2805-5X | 1 | Interactive Lab Assistant: Self-commutated converter circuits |
| Accessories | ||
| LM9525 | 1 | Workpiece, bottom section, black |
| LM9521 | 1 | Workpiece, top section, white |
| LM9527 | 3 | Bolt workpiece, metal |
| LM9528 | 3 | Bolt workpiece, plastic |
Learning Content in Detail
Understanding multi-variant processing
Programming the order decision
Switching dual pneumatic valves
Adjusting approach times
Implementing touchscreen visualization
Structuring function blocks for double stations
Extending system libraries
Validating press-fit processes
Features & Applications
- Press-fitting two pin types according to the order — Two separate magazine chutes allow different types of metal or plastic pins to be press-fitted, depending on the order.
- Selectively controlling four pneumatic valves — Four solenoid valves control two independent pairs of stoppers and press cylinders and lock the carrier precisely beneath chute A or B.
- Order selection on the touchscreen — Using the KTP700 touch panel, operators select the pin type to be processed and monitor the process steps.
- Dual level monitoring — Two light barriers record the material stock in each chute separately and block requests when material runs short.
- DC motor with incremental encoder — The drive enables speed-controlled conveyor movements and position measurements via pulse evaluation. Using PWM, the belt can be moved at different speeds.
- Siemens S7-1215C with digital module — The PLC provides the extended I/Os needed to control two press-fit units and the conveyor drive synchronously.
- SIMATIC KTP700 Basic Panel (CO3713-4Q) — The panel displays processing orders and magazine levels and allows the pin type to be selected manually.
- Two chute magazines, A and B — The magazines hold different pins, for example made of aluminum and plastic, for customer-specific press-fit orders.
- Pneumatic press cylinders — Depending on the order selected, the cylinders press the pin from magazine 1 or magazine 2 into the workpiece.
- IO-Link with RFID head and ultrasonic sensors — An RFID read/write head for sending data to the workpiece carrier and ultrasonic sensors for precisely determining the magazine fill levels are connected via an IO-Link master module.
- 25-pin transfer module (-X1) — The module bundles the sensor and actuator signals as well as the power supply of the double station and transmits them while preventing incorrect connection.
- Siemens TIA Portal and WinCC — Engineering software for variable-based step sequences, function blocks with order flags and touchscreen displays.
- Interactive Lab Assistant course SO2805-5J — Interactive learning software with step-by-step instructions for programming double processing stations.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.