Skip to content

Electrical Network Analysis

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Electrical Network Analysis

BET06UT

Compact UniTrain training system for circuit analysis: students calculate branched DC networks using Thevenin’s and Norton’s theorems and the superposition theorem, and verify the results on a universal plug-in field.

Learning Content
  • Getting to know the basic equations of electrical networks
  • Setting up Kirchhoff’s equations
  • Analyzing resistor networks using Kirchhoff’s laws
  • Determining power matching
KEY FEATURES
  • Circuit analysis experiment card
  • Verifying linear network theorems
  • Universal plug-in field on the experiment card
  • Working at safety extra-low voltage
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Branched DC networks are difficult to handle using only the basic laws. Network theorems reduce the amount of calculation required for dimensioning and for structured troubleshooting in power and signal networks. The training system uses LabSoft to guide students through the solution methods and lets them check the result immediately on their own circuit. Series, parallel, bridge and wye-delta networks are built on the universal plug-in field; they are supplied by two constant voltage sources of 4 V and 6 V and two constant current sources of 30 mA and 50 mA. Students activate sources individually, determine open-circuit voltages and short-circuit currents, and convert complex networks into equivalent sources. The entire system operates below 25 V AC and 50 V DC.

CO4204-4CCourse Electrical engineering 6: Electrical network analysis
LM2330Multi13S digital multimeteroptional
CO4203-2AUniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2JUniTrain measurement accessories, shunts and connection cables
CO4203-2YUniTrain storage case for one UniTrain system
CO4203-2BUniTrain Experimenter

Learning Content in Detail

The training leads from the basic equations of electrical networks through Kirchhoff’s laws, wye-delta transformation and the superposition theorem to equivalent voltage and current sources.

Getting to know the basic equations of electrical networks

Students become familiar with the basic equations of electrical networks.

Setting up Kirchhoff’s equations

Students set up Kirchhoff’s equations for a resistor network.

Analyzing resistor networks using Kirchhoff’s laws

Students analyze resistor networks using Kirchhoff’s equations.

Determining power matching

Students investigate power matching in resistor circuits.

Transforming networks

Students transform electrical networks and apply the wye-delta transformation.

Applying the superposition theorem

Students learn about the superposition theorem and apply it to networks.

Simplification of resistor networks using Thevenin's theorem

Students simplify resistor networks using the equivalent voltage source theorem.

Simplification of resistor networks using Norton's theorem

Students simplify resistor networks using the equivalent current source theorem.

Applying Millman’s theorem

Students simplify a resistor network with two sources using Millman’s theorem.

Converting sources into one another

Students convert an equivalent voltage source into an equivalent current source.

Features & Applications

The experiments address questions from general electrical engineering and circuit development, as well as from maintenance, electrical and mechatronic systems engineering, and electrical power engineering and automation technology.
  • Circuit analysis experiment card — It offers a universal plug-in field for the flexible construction of series, parallel, bridge and wye-delta networks.
  • Verifying linear network theorems — Students investigate mathematical analysis methods such as Thevenin’s and Norton’s theorems directly on the experiment setup.
  • Universal plug-in field on the experiment card — A wide variety of resistor networks can be built on the plug-in field. This allows a large number of analysis methods for DC networks to be applied.
  • Working at safety extra-low voltage — The entire system operates exclusively below 25 V AC and 50 V DC. This allows students to experiment without danger.
  • Analyzing bridge circuits experimentally — Students analyze complex bridge circuits and determine currents and voltage drops through real measurements.
  • Applying the superposition principle — Students switch individual voltage sources active or passive one after the other in order to verify the superposition theorem by measurement.
  • Determining the parameters of equivalent sources — Students determine open-circuit voltages and short-circuit currents and use them to convert complex networks into simple equivalent sources.
  • Integrated constant voltage sources — Two fixed DC voltages of 4 V and 6 V supply the measurement networks stably, either in parallel or separately.
  • Integrated constant current sources — Two impressed DC currents of 30 mA and 50 mA are available and enable advanced source transformations.
  • 18-piece plug-in resistor set — Various resistors and jumpers on mini printed circuit boards allow different network topologies to be plugged together flexibly.
  • Storage case — The robust hard-shell case with foam insert holds all the accessories and makes transport easier.
  • Voltmeter — It enables precise rms and average value measurements of voltages directly on the PC interface.
  • Ammeter — It enables precise rms and average value measurements of currents directly on the PC interface.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply