Skip to content

IMU with Subsystem Upper Part Assembly with Double Magazine

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

IMU with Subsystem Upper Part Assembly with Double Magazine

CIU4dIU

Using the double top part assembly subsystem, the mobile Industrial Mechatronic Unit assembles two different top part variants onto workpiece bottom parts. The variant is selected by the order on the touch panel.

Learning Content
  • Understanding variant assembly
  • Programming the order decision
  • Switching dual assembly valves
  • Adjusting approach times
KEY FEATURES
  • Placing two top part variants according to the order
  • Selectively controlling four pneumatic valves
  • Order selection on the touchscreen
  • Dual level monitoring
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Flexible assembly systems put together different variants without having to stop. The double top part assembly subsystem shows how this works: two separate magazine chutes hold different top parts, and four solenoid valves lock the workpiece carrier beneath the selected chute and actuate the corresponding joining pawl. Two light barriers monitor the stock in each chute individually. On the KTP700 touch panel, operators select the housing variant and follow the process steps. In TIA Portal, learners evaluate the recipe bits, adapt travel times and creep phases to the two chute positions and encapsulate the logic in reusable function blocks.

LM9536Industrial Mechatronic Unit
LM9532Film, for oscilloscope cameratype LM 7000
SO6200-2UQuickChart, IPA 1 Compact station (GB)
LM9646Assembly double station
LM9066Interface cable 25-pin, Sub-D socket / plug 1m
SO6200-2RQuickChart IMS 4d Mechatronics Assembly double station
SO2805-5JInteractive Lab Assistant: IMU 1 Industrial Mechatronic Unit
SO2805-5XInteractive Lab Assistant: Self-commutated converter circuits
LM9524Workpiece, bottom section, white
LM9521Workpiece, top section, white
LM9522Workpiece, top section, black

Learning Content in Detail

Learners work through multi-variant assembly: from evaluating the order data and controlling the pneumatics through to reusing their own blocks.

Understanding variant assembly

Learners analyze the design and control of flexible double assembly stations.

Programming the order decision

Learners evaluate recipe bits and use them to control the carrier approach and the assembly at chute A or B.

Switching dual assembly valves

Learners control four solenoid valves to actuate stoppers and joining pawls selectively.

Adjusting approach times

Learners set travel times and creep phases precisely for the positions of both chutes.

Implementing touchscreen visualization

Learners design HMI screens for entering order data and displaying magazine levels.

Structuring function blocks for double stations

Learners develop extended function blocks with order flags and decoupled sequences.

Extending system libraries

Learners store blocks for double assembly stations in global TIA libraries.

Validating assembly processes

Learners test selective top part assembly in the TIA Portal while changing the order data.

Features & Applications

The unit covers automation technology, flexible assembly and production technology, and industrial control technology.
  • Placing two top part variants according to the order — Two separate magazine chutes make it possible to place different top part variants on a bottom part, depending on the order.
  • Selectively controlling four pneumatic valves — Four solenoid valves control two independent pairs of stoppers and joining pawls and lock the carrier precisely beneath chute A or B.
  • Order selection on the touchscreen — Using the KTP700 touch panel, operators select the housing variant to be assembled and monitor the process steps.
  • Dual level monitoring — Two light barriers record the material stock in each chute separately and block requests when material runs short.
  • DC motor with incremental encoder — The drive enables speed-controlled conveyor movements as well as distance and position measurements by evaluating the pulses.
  • Siemens S7-1215C with digital module — The PLC provides the extended I/Os needed to control two assembly stations and the conveyor drive synchronously.
  • SIMATIC KTP700 Basic Panel — The panel displays assembly orders and magazine levels and allows the housing variant to be selected manually.
  • Pneumatic separating pawls — Depending on the order selection, the pawls eject the required component from chute A or chute B.
  • IO-Link with RFID head and ultrasonic sensors — An RFID read/write head for sending data to the workpiece carrier and ultrasonic sensors for precisely determining the magazine fill levels are connected via an IO-Link master module.
  • 25-pin transfer module (-X1) — The module bundles the sensor and actuator signals as well as the power supply of the double station and transmits them while preventing incorrect connection.
  • Siemens TIA Portal and WinCC — Engineering software for variable-based step sequences, function blocks with order flags and touchscreen displays.
  • Interactive Lab Assistant course SO2805-5J — Interactive learning software with step-by-step instructions for programming double assembly stations.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply