Open-Loop Control of Electrical Drive Systems
Open-Loop Control of Electrical Drive Systems
Teach the commissioning, parameterization and PROFINET connection of variable frequency drives (VFDs) and induction motors via a PLC.
- Parameter configuration
- Analyzing motor operation
- Testing direction reversal
- Fixed frequency control
- Integrated flux current control
- Flexible setpoint input
- Multilingual operator panel
- Commissioning in TIA Portal
Efficient motor control via fieldbuses forms the backbone of modern automated production plants. With this system, learners work their way from manual parameterization directly on the device through to complex fieldbus integration in TIA Portal. The system is based on industrial speed control using a variable frequency drive (VFD) and an induction motor. You benefit from practical automation technology developed for technical schools and industrial companies.
| Course | |
| SO2805-4Q | Interactive Lab Assistant: CLP 21 Industrial drives – PLC controlled |
| Accessories | |
| LM9070 | Patch cable Cat6 grey, (1m) |
| Furniture | |
| ST7200-7A | SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm |
| ST8010-4T | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | Protection cover for three-level experiment trolleys |
| Furniture Accessories | |
| ST8000-2J | Display for equipment Industrial drives PLC controlled |
| Measurement Leads | |
| SO5126-3R | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5126-9G | Safety measurement cable 4mm, 150cm/60", black, 600V CAT III ~1000V CAT II / 32A |
| SO5126-9P | Safety measurement cable 4mm, 150cm/60", green, 600V CAT III ~1000V CAT II / 32A |
| SO5126-9M | Safety measurement cable 4mm, 150cm/60", green/yellow, 600V, CAT III ' 1000V, CAT II / 32A |
Learning Content in Detail
Parameter configuration
Analyzing motor operation
Testing direction reversal
Fixed frequency control
Investigating frequency addition
Analog value processing
HMI user interface
Establishing a PROFINET connection
Features & Applications
- Integrated flux current control — Flux current control automatically compensates for voltage losses across the stator resistance under load.
- Flexible setpoint input — Learners control the speed via a potentiometer, the operator panel, PC software or directly via fieldbus systems.
- Multilingual operator panel — The Intelligent Operator Panel allows intuitive, menu-guided commissioning directly on the inverter.
- Commissioning in TIA Portal — Learners use the software-based commissioning wizard for fast and error-free device configuration.
- Telegram-based bus control — Free telegram configuration via PROFINET provides practical insight into mechatronic data transmission without physical wiring.
- SIMATIC S7-1200 basic unit — The module provides 14 digital inputs with simulation switches as well as integrated PROFINET interfaces.
- SINAMICS G120 variable frequency drive — The industrial drive features six digital inputs, one analog input and an integrated braking chopper.
- Three-phase induction motor — The motor delivers 0.37 kW at 1400 rpm and can be operated in star or delta connection.
- KTP700 HMI touch panel — The panel has a high-resolution 7-inch widescreen display for visualization and plant control.
- Shaft end cover — The mechanical cover reliably protects learners from rotating motor parts during lab operation.
- Single-phase power connection — The module protects the workstation with a switch, a circuit breaker and a Schuko outlet.
- Temperature sensor — The bimetallic NC contact integrated in the motor provides hardware-based temperature monitoring to protect the system.
- TIA Portal incl. STARTDRIVE — The engineering software is used for structured parameterization, programming and diagnostics of the entire system.
- Interactive Lab Assistant (ILA) — The interactive learning software uses multimedia to guide learners through theory, experiment setups and automated test reports.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.