Skip to content

Analog Power Supplies

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Analog Power Supplies

BEL06UT

Interactive training system for the measurement-based investigation of rectifiers, voltage multipliers, transistor regulators and fixed voltage regulators. Four experiment cards cover the complete chain of analog power supply units.

Learning Content
  • Comparing rectification methods
  • Evaluating smoothing networks
  • Analyzing voltage multiplication
  • Investigating transistor regulators
KEY FEATURES
  • Rectifier circuits experiment card
  • Voltage multiplier experiment card
  • Transistor power supply experiment card
  • Fixed voltage regulator experiment card
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Sensitive electronic circuits only work reliably if their DC voltage is stable and low in noise. The training system teaches the design and operation of analog DC power supplies, from rectification and smoothing through to voltage regulation. Learners use measurements to investigate the circuit concepts on four Eurocard experiment cards and analyze the operating behavior under load. They compare half-wave and bridge rectifiers, evaluate filter capacitors and inductors on the basis of the ripple voltage, measure Villard cascades and test the regulation behavior of transistor and fixed voltage regulators. Nine faults that can be activated via relays make fault diagnosis an integral part of the course.

CO4204-5RCourse Electronics 7: Analog power supplies
LM2330Multi13S digital multimeteroptional
CO4203-2AUniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2JUniTrain measurement accessories, shunts and connection cables
CO4203-2YUniTrain storage case for one UniTrain system
CO4203-2BUniTrain Experimenter

Learning Content in Detail

Learners work through the complete chain of an analog DC power supply and verify each stage by measurement.

Comparing rectification methods

Learners measure the mean values, RMS values and crest factors of half-wave and bridge rectifiers.

Evaluating smoothing networks

Learners determine the influence of capacitances and inductances on the ripple voltage and ripple factor.

Analyzing voltage multiplication

Learners measure the cascade voltages of the Villard circuit under varying loads.

Investigating transistor regulators

Learners determine the adjustment range and load regulation of discrete series and shunt voltage regulators.

Wiring fixed voltage regulators

Learners test L7805 IC regulators and raise the output voltage using Zener diodes.

Carrying out fault diagnosis

Learners systematically locate simulated circuit faults in power supply modules using the instruments in LabSoft.

Features & Applications

The experiments address tasks from circuit engineering and electronics development, as well as from the maintenance of electronic assemblies.
  • Rectifier circuits experiment card — The card contains half-wave and bridge rectifiers, an inductor, five smoothing capacitors, four load resistors and four simulated faults.
  • Voltage multiplier experiment card — The card provides a Villard cascade circuit for quadrupling the voltage, with switchable load resistors and two simulated faults.
  • Transistor power supply experiment card — The card combines a discrete series and shunt transistor regulator with a TIP140 Darlington stage, heat sink, three load resistors and two simulated faults.
  • Fixed voltage regulator experiment card — The card contains a regulator circuit with the L7805 IC on a heat sink, Zener diodes for raising the voltage and three high-load resistors.
  • Modular experiment card concept — Four specialized Eurocard boards cover the complete chain of analog power supplies, from rectification to regulation.
  • Rectification and RLC smoothing networks — Learners compare half-wave and bridge rectifiers and analyze how filter capacitors and inductors change the ripple voltage.
  • Cascaded voltage multiplication — Learners investigate Villard cascade circuits for multiplying AC voltages under changing load conditions.
  • Linear and fixed voltage regulation — Learners explore the regulation and load behavior of transistor voltage regulators with a Darlington stage and of integrated regulators.
  • Guided troubleshooting in power supply circuits — Nine circuit faults that can be activated via relays simulate open-circuit diodes or defective capacitors. Learners locate them under realistic conditions.
  • UniTrain interface with safety extra-low voltage — All outputs carry safety extra-low voltage, so learners can work without risk. Integrated protective circuits prevent damage to the device in the event of incorrect wiring.
  • UniTrain Experimenter — The Experimenter holds the experiment cards and connects them to the UniTrain bus. The ejector mechanism allows cards to be changed quickly.
  • 4 voltmeters — The four voltmeters measure AC and DC voltages in nine measuring ranges from 100 mV to 50 V and display either the RMS, mean or peak value.
  • LabSoft course software — The learning platform teaches the theoretical fundamentals, illustrates processes with animations, guides learners through the experiments and checks their level of knowledge in a knowledge test.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply