DC Drives with Cascade Control Using MATLAB – Simulink 300W
DC Drives with Cascade Control Using MATLAB – Simulink 300W
HIL training system for modeling and cascaded control of DC machines using Matlab®/Simulink®.
- Setting up an HIL system
- Deriving the motor model
- Parameterizing the current controller
- Optimizing the speed controller
- Model-based design and rapid prototyping
- Controller design using optimization methods
- Comparing simulation and reality directly
- Dynamic four-quadrant operation
Closed-loop DC drives are the didactic foundation for understanding system theory and the cascaded control of electrical machines. In industrial drive development, model-based design with MATLAB/Simulink is the established standard for rapid prototyping. The training system combines the two: students develop control structures on the PC, generate real-time code and load it onto the self-commutated power converter, which drives the 0.3 kW DC multifunction machine. A servo machine test system generates load steps, and an incremental encoder supplies the rotor position. Finally, students design current and speed controllers according to the modulus optimum and symmetrical optimum and compare the simulation with the measured values of the real drive.
| Base Product | |
| CO3636-3D | USB adapter with MATLAB toolbox for power electronics and process control |
| CO3212-5Q | Regulating transformer, exciter 0-200 V |
| SO2805-1R | Interactive Lab Assistant: DC drives using MATLAB-Simulink 0.3 kW |
| SE2662-3D | DC multi-circuit, compound wound machine, 0.3kW |
| SE2662-2U | Tachogenerator 1V/1000 r.p.m., 0.3kW |
| CO3636-3B | Self-commutated converter circuits |
| Course | |
| SO2805-1N | Interactive Lab Assistant: Inverter-fed drives with DC motors 0.3 kW |
| Power Supply | |
| CO3636-3E7 | 3-Phasen Trenntransformator 300VA |
| Measuring Instruments | |
| CO5127-2A | Power-Multimeter |
| Accessories | |
| SE2662-7C | Coupling guard with LED lighting for 300W machines |
| SE2662-2A | Rubber coupling sleeve, 0.3kW |
| CO3636-6X7 | Dynamic servo machine test stand for 300W machines incl. control software ActiveServo 2.0 |
| SE2662-2A | Rubber coupling sleeve, 0.3kW |
| SE2662-7C | Coupling guard with LED lighting for 300W machines |
| Furniture | |
| ST8010-4G | Keyboard adapter for flat screen monitor holders |
| ST8008-8N7 | Protected power distribution for workstations |
| ST8010-4J8 | Multiple power outlet strip, 6 outlets, US-standard |
| Furniture Accessories | |
| ST8000-5B | Display for Power Electronics equipment |
| Measurement Leads | |
| SO5148-1L | Set of safety measurement cables, 4mm (31 leads) |
| SO5126-3R | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5126-3V | Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II |
| SO5126-3W | Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II |
Learning Content in Detail
Setting up an HIL system
Deriving the motor model
Parameterizing the current controller
Optimizing the speed controller
Evaluating simulation quality
Features & Applications
- Model-based design and rapid prototyping — Students develop the control structure on the PC, generate real-time code from it at the click of a mouse and load it onto the power converter. They use it to control the real hardware directly.
- Controller design using optimization methods — Students calculate the parameters of the current controller according to the modulus optimum and those of the speed controller according to the symmetrical optimum. They then optimize the values on the real plant.
- Comparing simulation and reality directly — In the time diagram, students superimpose the simulated signals on the real-time measured values of the drive. From the deviations, they analyze friction losses and moments of inertia.
- Dynamic four-quadrant operation — Load tests run in all four quadrants. Students vary torque and speed continuously and evaluate the curves on the PC.
- Self-commutated power converter with DSP — The control unit with a 6-pulse IGBT inverter and integrated DSP processes the generated Simulink code in real time and drives the machine.
- USB adapter with MATLAB toolbox — The electrically isolated hardware interface exchanges parameters and measurement data bidirectionally between the Simulink model and the power converter.
- DC multifunction machine, 0.3 kW — In the course, the machine runs with separate excitation. Its electronic nameplate assists with parameterizing the motor models in the software.
- Incremental position encoder with 1024 pulses — The TTL encoder detects the rotor position. Students evaluate the signals in the DSP and use them to calculate the rotational frequency for the flux estimator.
- Servo machine test system as an active load — The test system emulates load steps and measures the mechanical torque. Students use it to check the control response of their Simulink controllers.
- Tool-free coupling and temperature protection — The machine under test and the brake are coupled without backlash and without tools. An integrated temperature contact protects the motor against thermal overload.
- Shaft cover with safety interlock — The Makrolon cover protects against rotating parts. The status LED lights up green only when there are no faults, and only then does the system enable the power supply.
- Lucas-Nülle MATLAB toolbox — Tailored Simulink blocks, for example for the Clarke transformation and IGBT control, are available for drive design and shorten the algorithm engineering process.
- Live scope via USB — Students access the DSP live, record rotor-fixed currents, phase voltages and speed in real time and adjust controller parameters at runtime.
- Interactive course in the Interactive Lab Assistant — The software guides students through the design process using multimedia. Students derive mathematical models, answer knowledge questions and compare simulation results.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.