Installation board DALI applications

In addition to the DALI power supply, the board also contains external pushbuttons, potentiometers and DALI applications. Programming is performed either via an additional USB controller or via WLAN touch display. The following applications can be programmed:

• Addressing and commissioning a DALI system
• Automatic and semi-automatic motion detection
• Constant light regulation
• Scenario settings
• Push function
• On/off function
• Stairway function (timer function)
• Creation of group devices
• Measurement and visualization of temperature, air quality, air pressure and humidity
• Shutter control

The DALI bus is not implemented using safety extra-low voltage by default, meaning that the DALI wiring needs to be capable of handling mains voltage. The DALI bus has reversible electronic overload and short-circuit protection.

Equipment Set:

• DALI bus power supply
• DALI pushbutton interface, 4-fold
• DALI presence / motion detector
• LED strip, white with DALI driver CW-WW
• LED strip, RGBW with DALI driver DT8 RGBW
• 2 conventional installation pushbuttons
• 2 potentiometers 0...100%, for analog input signals

Technical data:

• Operating voltage: 120-240 V AC, 50– 60 Hz,
• Auxiliary voltage: 24 V DC
• DALI interfaces
• Inputs/outputs:
  Mains (line) voltage 4-mm safety sockets
  Extra-low voltage 2-mm safety sockets
  All inputs and outputs are designed as plug-in contacts for realistic installation.
• Dimensions 456 x 297 x 60 mm (WxHxD)
• Weight: 1.8 kg