Skip to content

Smart grid: the energy chain from generator to load management

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Smart grid: the energy chain from generator to load management

EIS11PT

Modular training system in panel format: students analyze power transmission, protection technology and demand side management on real hardware and control the grid via a SCADA environment.

Learning Content
  • Analyzing physical effects on transmission lines
  • Performing switching operations in a double busbar system
  • Parameterizing and testing digital power system protection devices
  • Developing demand side management strategies
KEY FEATURES
  • Physically replicating the energy chain through to the consumer
  • Investigating critical grid states safely
  • Implementing demand side management interactively
  • Double busbar with industrial switching logic
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

The energy transition requires flexible, intelligently controlled grids instead of rigid structures. The training system physically replicates the energy chain right through to the consumer: double busbar, overhead line model for 150 and 300 km, time-overcurrent relay, Power Quality Meter and a variable three-phase supply. Students perform switching operations on the double busbar, parameterize the digital protective relay and investigate critical states such as short circuits or the Ferranti effect within a safe voltage range. Via the SCADA environment, they couple load switches with control logic and trigger automated load shedding at peak load. In this way, they combine the physical fundamentals of power transmission with the digital control of modern load management scenarios.

CO3301-5RDouble busbar unit, three-phase, incoming / outgoing feeder
CO3301-3ATransmission line Model 150km/300km (93.2miles/186.4miles)
CO3301-4JÜberstromzeitrelais
CO3301-3FVariable Ohmic load, three-phase, 1kW
CO3301-5PPower switch module
CO3208-4LLamp board 230V
SO2800-9RInteractive Lab Assistant: Introduction to Smart Grid Technology
SO4001-3HSoftware SCADA Viewer
CO3301-3ZAdjustable 3-phase power supply, 0-450V/2A
CO5127-1SThree-phase power quality meter with display and long-term memory
LM9057Patch cable Cat5E 1x 1m yellow, 2x 2m yellow
LM8257USB 2.0 Ethernet adapter, 10/100
LM99885-Port Ethernet Switch
LM9025Interface converter USB/RS485
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8000-4ADisplay for Smart Grid equipment
SO5126-3RSafety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3VSafety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3WSafety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II
SO5148-1LSet of safety measurement cables, 4mm (31 leads)

Learning Content in Detail

The experiments progress from analyzing physical line effects through safe switching operations and power system protection to demand side management strategies.

Analyzing physical effects on transmission lines

Students investigate the voltage rise at no load (Ferranti effect) and determine the optimum power matching.

Performing switching operations in a double busbar system

Students perform switching operations in compliance with the technical interlocks and the specified switching sequences.

Parameterizing and testing digital power system protection devices

Students protect the grid against overload as well as single-phase, two-phase and three-phase short circuits and test the tripping.

Developing demand side management strategies

Students design and validate strategies for stabilizing the grid in the presence of fluctuating generation and variable load.

Features & Applications

The experiments cover the operation and monitoring of modern power grids, the configuration and testing of power system protection devices in industrial distribution networks, and the implementation of demand side management strategies for grid stabilization.
  • Physically replicating the energy chain through to the consumer — All stages of the power supply are present as hardware. Students use them to explore system-wide interdependencies and feedback effects in the power grid.
  • Investigating critical grid states safely — The system uses industrial protection and measurement technology while remaining within the safe voltage range. Short circuits and the Ferranti effect can be reproduced experimentally without endangering students.
  • Implementing demand side management interactively — Load switches and SCADA logic are coupled, enabling automated load shedding at peak load. Students thus acquire directly applicable skills for the stability of modern power grids.
  • Double busbar with industrial switching logic — The CO3301-5R unit allows complex switching operations, up to and including an uninterrupted busbar changeover. Students use it to practice the correct switching sequence that prevents operating errors in grid operation.
  • Time-overcurrent relay CO3301-4J — The digital protective relay offers normal, severely and extremely inverse tripping characteristics. Students learn how selectivity in power system protection is achieved through parameterization.
  • SCADA Designer & Viewer for PowerLab — Central tool for monitoring and control: visualize power flows and switching states in real time, analyze transient events such as short circuits with the data logger, program soft PLC logic for energy management and parameterize devices via RS485 or Ethernet.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply