Skip to content

AC and DC in Automotive

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

AC and DC in Automotive

AGS21UT

UniTrain training system for automotive training: learners verify Ohm’s law and Kirchhoff’s laws on three experiment cards and record the characteristic curves of NTC, PTC, LDR and VDR components.

Learning Content
  • Verifying Ohm’s law
  • Applying Kirchhoff’s laws
  • Analyzing voltage dividers
  • Investigating sensor resistors
KEY FEATURES
  • DC and resistance analysis
  • Dynamic investigation of variable resistors
  • Bridge circuits and potential analysis
  • UniTrain resistor circuits card
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

All control, sensor and actuator functions in a vehicle are based on the fundamentals of DC and AC technology. In the vehicle electrical system, poor ground connections, open circuits or altered sensor resistances cause malfunctions that can only be narrowed down by measurement. For this purpose, the experiment system combines real hardware cards with virtual measuring instruments and interactive learning software. The three UniTrain cards feature series, parallel and mixed resistor circuits, high- and low-resistance voltage dividers with a bridge circuit, and NTC, PTC, LDR and VDR components with threshold comparators. Learners alternate between calculating and measuring, determine the balanced state of the Wheatstone bridge and record sensor characteristics themselves.

CO4204-7ACourse: AC and DC in automotive
CO4203-2AUniTrain Interface mit virtuellen Instrumenten (Basis VI)
CO4203-2JUniTrain measurement accessories, shunts and connection cables
CO4203-2YUniTrain storage case for one UniTrain system
CO4203-2BUniTrain Experimenter
LM2330Multi13S digital multimeter
CO4203-2YUniTrain storage case for one UniTrain system

Learning Content in Detail

Learners calculate and measure the basic quantities of electrical circuits and apply the results to the vehicle electrical system and sensors.

Verifying Ohm’s law

Learners calculate and measure voltage, current and resistance values in basic circuits.

Applying Kirchhoff’s laws

Learners determine node currents and mesh voltages in extended circuits.

Analyzing voltage dividers

Learners determine the division ratio of loaded and unloaded voltage dividers.

Investigating sensor resistors

Learners record the temperature, light incidence and voltage characteristics of NTC, PTC, LDR and VDR components.

Features & Applications

The experiments focus on automotive electrics and electronics, i.e., the basic electrical circuits on which the vehicle electrical system, sensors and actuators are built.
  • DC and resistance analysis — Learners verify Ohm’s law and Kirchhoff’s laws on series, parallel and mixed resistor circuits.
  • Dynamic investigation of variable resistors — Learners investigate variable resistors, capturing both time-dependent responses and the associated characteristic curves.
  • Bridge circuits and potential analysis — Learners analyze loaded and unloaded voltage dividers and determine the balanced state of the Wheatstone bridge.
  • UniTrain resistor circuits card — The board provides series, parallel and mixed circuits as well as an incandescent lamp, which can be used to verify Ohm’s law and Kirchhoff’s laws.
  • UniTrain voltage divider card — The card includes high- and low-resistance voltage dividers, load resistors, a potentiometer and a bridge circuit for practical measurements.
  • UniTrain variable resistors card — The module contains NTC, PTC, LDR and VDR components as well as threshold comparators for evaluating signals visually and by measurement.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply