Skip to content

DC Technology

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

DC Technology

BET01ET

The EloTrain plug-in system enables hands-on construction and measurement-based analysis of fundamental electrical circuits in the safe extra-low voltage range. The LabSoft course guides learners through the experiments step by step.

Learning Content
  • Building and commissioning simple circuits
  • Using ammeters and voltmeters
  • Stating and applying Ohm’s law
  • Taking measurements on series and parallel circuits
KEY FEATURES
  • Multi Power Supply
  • Safe learning thanks to safety extra-low voltage
  • Short changeover times thanks to a clear component layout
  • Measurement-based analysis of Kirchhoff’s laws
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Anyone who is to commission installations or locate faults in them must be able to analyze circuits and take measurements correctly. The training system teaches the laws governing current, voltage and resistance as well as the behavior of linear and non-linear components in a closed DC circuit. Learners plug the circuits together themselves on the plug-in board using 4 mm components, verify Ohm’s law on fixed resistors and test Kirchhoff’s laws at nodes and meshes. They record the characteristic curves of an incandescent lamp, VDR, NTC and PTC and investigate loaded and unloaded voltage dividers. The LabSoft course software leads them from theory directly into practical implementation with real components.

PS4400-1BEloTrain basic set without board: Electrical engineering/electronics, 4mm
CO5127-3LEloTrain case to hold DIN A4 boards for storing plug-in components
SO2804-7BInteractive Lab Assistant: DC Technology
PS4400-1AEloTrain basic set: Electrical engineering/electronics 4mm, with storage boardoptional
CO3535-5HEloTrain plug-in board 2/4mm, 120 nodes
SO5146-1MEloTrain set of connection cables and plugs for 4mm system
CO3538-8MMulti Power Supply 4x DC, 2x AC, 3-phase, function generator
LM2332Max 10 digital multimeter
LM6210Digital dual trace storage oscilloscope w. colour display, incl. probes 30MHz
LM9032Test lead, BNC/2x 4mm plug, 1.5m

Learning Content in Detail

Learners gain an understanding of the basic quantities of the DC circuit and of the measurement practice used to verify them.

Building and commissioning simple circuits

Learners build simple circuits and put them into operation.

Using ammeters and voltmeters

Learners use ammeters and voltmeters correctly.

Stating and applying Ohm’s law

Learners state Ohm’s law and apply it to circuits.

Taking measurements on series and parallel circuits

Learners carry out current and voltage measurements on series and parallel circuits of resistors.

Applying Kirchhoff’s laws

Learners apply Kirchhoff’s laws to the circuits they have built.

Recording current-voltage characteristics

Learners record the current-voltage characteristics of components.

Investigating voltage divider circuits

Learners investigate voltage divider circuits in the unloaded and loaded state.

Characterizing variable resistors

Learners carry out measurements to characterize variable resistors.

Describing the properties of variable resistors

Learners describe the properties of LDRs, PTCs, NTCs and VDRs.

Investigating capacitors in the DC circuit

Learners determine the behavior of capacitors in the DC circuit experimentally.

Features & Applications

The experiments cover basic training in general electrical engineering, as well as the installation, maintenance and commissioning of electrical systems and work on electrical equipment.
  • Multi Power Supply — The compact supply unit provides fixed and adjustable DC and AC voltages as well as a three-phase source. Two LCD displays show the parameters.
  • Safe learning thanks to safety extra-low voltage — The system works exclusively with touch-safe safety extra-low voltage. This means all experiments can be carried out even without prior knowledge of electrical engineering.
  • Short changeover times thanks to a clear component layout — The color-printed storage board allows components to be taken out quickly and makes it easy to check that everything is complete after the experiment.
  • Measurement-based analysis of Kirchhoff’s laws — By inserting bridging plugs and measuring instruments in a targeted way, learners investigate current division at nodes and voltage distribution in meshes.
  • Adjustable current limiting — The adjustable current limiting of the variable DC voltage source protects sensitive components against excessive currents.
  • EloTrain plug-in board — The desk-style housing offers 120 consecutively numbered nodes and integrated voltage buses. The high packing density allows flexible and compact circuit layouts.
  • Transparent 4 mm plug-in components — The impact-resistant polycarbonate housing provides a clear view of the component. Gold-plated lamella plugs with plastic sleeves ensure good contact and touch protection.
  • Experimental verification of Ohm’s law — Learners apply variable voltages to fixed resistors, measure the resulting current and verify the linear proportionality themselves.
  • Characteristic curve analysis of non-linear components — Learners record the current-voltage characteristics of incandescent lamps and VDR, NTC and PTC resistors and interpret the temperature-dependent or voltage-dependent effects.
  • Analysis of loaded and unloaded voltage dividers — Learners investigate the voltage ratios on resistive voltage dividers and document how load resistors connected in parallel change the output voltage.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply