Skip to content

Protection for Electrical Machines 300W

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Protection for Electrical Machines 300W

EEM46PT-300W

PanelTrain bench-top system with motor protection board, sensor-equipped 0.3 kW induction motor and servo test bench: learners set protective devices and measure their tripping behavior under stall, heavy starting and overload conditions.

Learning Content
  • Connecting the induction motor correctly
  • Parameterizing protective devices
  • Simulating a pump blockage
  • Evaluating heavy starting
KEY FEATURES
  • Comparing real protection concepts
  • Recreating industrial fault scenarios
  • Monitoring temperature directly at the winding
  • Recording dynamic processes in real time
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

If a foreign object blocks the circulation pump in a wastewater treatment plant, the protective device decides whether the motor survives. On the bench-top system, learners build the corresponding circuits themselves: the board combines a motor protection circuit breaker, overload relay, thermistor protection relay and load contactors, and the 0.3 kW induction motor is fitted with a PT100, PTC and bimetallic switch. The servo machine test system reproduces stalls and the heavy starting of large flywheel masses, while the software records currents and temperatures live. The multimedia course guides learners through the design of a wastewater treatment plant. By the end, learners can set protective devices to the rated current, measure tripping times and compare them with the manufacturer’s characteristic curve.

SE2682-3ZThree-phase induction motor with various temperature sensors, 0.3kW
CO3213-7XBoard for motor protection systems 300W
LM2324True RMS digital multimeter
SO2805-1FInteractive Lab Assistant: Protection for electrical machines 0.3 kW
CO3212-5VThree-phase power supply with motor protection switch
CO5127-2APower-Multimeter
CO3636-6XDynamic servo machine test system for 0.3kW machines incl. software ActiveServo
SE2662-2ARubber coupling sleeve, 0.3kW
SE2662-7CCoupling guard with LED lighting for 300W machines
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8008-8NProtected power distribution for working stations
ST8010-4JMultiple socket outlet, 6 fold, with illuminated switch
ST8000-5ADisplay for Electrical Machines equipment
SO5148-1LSet of safety measurement cables, 4mm (31 leads)
SO5126-3RSafety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3VSafety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3WSafety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II

Learning Content in Detail

The multimedia course links the theoretical tripping characteristics with real load tests on the servo test bench.

Connecting the induction motor correctly

Learners wire the motor to the three-phase supply via 4 mm safety jacks and commission it.

Parameterizing protective devices

Learners select motor protection circuit breakers and overload relays and set them precisely to the rated current of the motor.

Simulating a pump blockage

Learners emulate a blocked pump and determine the switch-off time in comparison with the manufacturer’s characteristic curve.

Evaluating heavy starting

Learners investigate the tripping behavior of CLASS 10 and CLASS 20 circuit breakers and overload relays when starting large flywheel masses.

Recording temperature curves

Using the PT100 sensor, learners record the heating and cooling of the motor and derive its thermal behavior from this.

Verifying thermistor protection

Learners subject the motor to thermal load and verify that the evaluation unit switches it off via the integrated PTC sensors.

Features & Applications

The tasks are drawn from the water industry with its circulation pumps, from the heavy starting of large industrial fans and from cranes and hoists with strongly fluctuating loads.
  • Comparing real protection concepts — Motor protection circuit breakers, overload relays and evaluation units are combined on a single panel. Learners parameterize these components specifically for individual industrial load profiles and compare the concepts with one another.
  • Recreating industrial fault scenarios — The test system emulates blocked pumps or fans. Learners use it to investigate the real behavior of the protective devices.
  • Monitoring temperature directly at the winding — The industrial motor has integrated PT100 and PTC sensors and a bimetallic switch. The various protective devices can be tested on one motor while the temperature at the winding is measured at the same time.
  • Recording dynamic processes in real time — The software captures motor currents and temperature curves live and records them over time. This lets learners see immediately when a protective device responds.
  • Motor protection systems board, 300 W — The panel contains motor protection circuit breakers, overload relays, thermistor protection relays and load contactors. Learners use it to build and compare industrial protection circuits.
  • Three-phase induction motor with sensors, 0.3 kW — The IE2 motor has built-in sensors: PT100, PTC and bimetallic switch. An electronic nameplate provides all machine data directly to the test system.
  • Servo machine test system as an active brake — A digital control unit, an induction servo motor acting as an active brake and the ActiveServo software make up the test system. Learners operate the drive in four-quadrant mode and emulate up to ten driven machines, such as fans, pumps or flywheel masses.
  • TRMS multimeter with data logger — The rugged true RMS multimeter has a data logger function and a USB interface. Learners use it to record currents and temperature values.
  • Coupling test object and brake without tools — A coupling sleeve with an internal ring gear connects the motor and brake free of backlash and with vibration damping, entirely without tools. The plug-on shaft cover switches off the supply voltage immediately as soon as it is removed during operation. LEDs indicate the safe system status.
  • ActiveServo software — Three views guide users through the machine analysis. Learners record motor characteristics under speed or torque control, define ramp functions and emulate eight driven machines. They superimpose the load characteristic of these machines on the motor characteristic and thus determine the operating point.
  • Interactive Lab Assistant — The multimedia course guides learners through the design of a wastewater treatment plant. Learners parameterize the virtual instruments and document the measured tripping times.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply