Skip to content

Automatically Press-Fitting Pins into Workpiece Housings

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Automatically Press-Fitting Pins into Workpiece Housings

CIS05IS

Teach automated joining processes through hands-on training. Your students learn to program pneumatic operations in TIA Portal and understand how sensors and actuators work together.

Learning Content
  • Analyzing joining processes
  • Controlling the press cylinder
  • Evaluating cylinder end positions
  • Designing sequential controls
KEY FEATURES
  • Press-fitting pins in a controlled manner
  • Monitoring both cylinder end positions
  • Monitoring the magazine optically
  • Detecting the magazine fill level
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

With this subsystem, you can teach your students how mechanics, pneumatics, sensors, and control technology work together in an automated joining process. Your students program the process sequence in TIA Portal, evaluate sensor signals, and coordinate pneumatic movements.

The subsystem integrates into IMS and IMU conveyor lines. A pneumatic stopper positions the workpiece carrier beneath the press-fitting station. A pneumatic cylinder then presses a brass or plastic pin from the supply magazine into the prepared hole in the workpiece housing. Two magnetic cylinder sensors detect the home and pressing positions, while a retroreflective photoelectric sensor monitors pin availability.

Your students develop the required sequence control program, process sensor signals, and adjust cylinder speed using flow control valves. By systematically troubleshooting cylinder sensors and control programs, they strengthen their diagnostic skills. This helps you build practical competencies in commissioning, monitoring, and optimizing automated assembly processes.

LM9515Cyber physical conveyor system with PLC
SO6200-2PQuickChart IMS 1.5 Cyber-physical conveyor belt system
LM9532Film, for oscilloscope cameratype LM 7000
LM9672DC power supply 24V/5A for IMS conveyor belts
LM9682Processing station
LM9066Interface cable 25-pin, Sub-D socket / plug 1m
SO6200-1EQuickChart, IMS 5 Mechatronics Process subs-system (GB)
PAT050001CRXLea Content CIS01IS: Inbetriebnahme eines cyberphysischen Systems
SW00001Software RX Lea
SW00019Software LN Installer
PAT050002CRXLea Content CIS01IS: Grundlagen der SPS Programmierung
SW00001Software RX Lea
SW00019Software LN Installer
PAT050003CRXLea Content CIS01IS: Geschwindigkeitskontrolle mit PWM
SW00001Software RX Lea
SW00019Software LN Installer
PAT050004CRXLea Content CIS01IS: Analogwertverarbeitung in der SPS
SW00001Software RX Lea
SW00019Software LN Installer
SO2805-5XInteractive Lab Assistant: Self-commutated converter circuits
LM9677IMS displacement measurement module
LM8257USB 2.0 Ethernet adapter, 10/100
LM9716Set of Allen keys
LM9521Workpiece, top section, white
LM9525Workpiece, bottom section, black
LM9527Bolt workpiece, metal
LM9528Bolt workpiece, plastic
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys

Learning Content in Detail

Learners work through the press-fitting process, from valve control and evaluation of the end-position signals to the step sequence and adjustment of the flow control valves.

Analyzing joining processes

Learners analyze the pneumatic and mechanical sequence involved in press-fitting pins into assemblies.

Controlling the press cylinder

Learners program the solenoid valves to precisely time the ejection and press-fitting process.

Evaluating cylinder end positions

Learners logically process the signals from the magnetic cylinder switches in the home and press positions.

Designing sequential controls

Learners create step sequences in accordance with EN 61131-3 for time-driven and state-driven control.

Integrating magazine monitoring

Learners link the retro-reflective light barrier so that the sequence shuts down automatically when the chute is empty.

Creating modular function blocks

Learners encapsulate the press-fitting logic in reusable blocks with clearly defined interfaces.

Adjusting flow control valves

Learners assess how the air flow restrictors affect cylinder speed and press-fit accuracy.

Diagnosing faults systematically

Learners identify misaligned cylinder switches and malfunctions in the sequence code.

Features & Applications

The subsystem combines three subject areas: automation technology, joining and press-fitting technology, and pneumatics and control technology.
  • Press-fitting pins in a controlled manner — The subsystem pushes pins from the supply magazine into the prepared bore in the housing with a precise fit and controlled cylinder force.
  • Monitoring both cylinder end positions — Two magnetic cylinder switches monitor the home position and the extended press position of the working cylinder.
  • Monitoring the magazine optically — A retro-reflective light barrier with reflector detects whether at least one press-fit pin has been loaded, preventing failed attempts when the chute is empty.
  • Detecting the magazine fill level — An IO-Link ultrasonic sensor detects the fill level of the magazine. The number of pins loaded can be derived from this data.
  • Standardized system coupling — All four sensor signals and both actuator signals of the processing station are routed via the 25-pin Sub-D transfer module, which prevents incorrect connection.
  • Magazine for press-fit pins — The magazine stores aluminum or plastic pins and feeds them to the press-fitting mechanism.
  • 3/2-way solenoid valve for the press cylinder — The valve actuates the pneumatic press cylinder, which presses the pin into the bore in the housing.
  • 4/2-way solenoid valve for the stopper — The valve lowers the stopper cylinder and holds the workpiece carrier exactly beneath the press-fitting position.
  • Suitable for IMS and IMU conveyor belts — The station can be mounted on an IMS or IMU conveyor belt in just a few steps. All that is then needed to commission it is the 25-pin Sub-D cable to the conveyor and the compressed-air connection.
  • Siemens TIA Portal — The engineering environment is used to create blocks, step sequences and signal logic for the joining process.
  • Interactive Lab Assistant course SO2805-5X — The interactive learning software contains 3D system models, instructions on step sequences and automatic knowledge tests.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply