Synchronous and Slip-Ring Machines
Synchronous and Slip-Ring Machines
Compact UniTrain system with an open experiment card and three interchangeable rotors: learners compare slip-ring, synchronous and reluctance machines and take measurements at safety extra-low voltage at the workstation.
- Comparing machine behavior
- Reducing starting currents
- Determining synchronous speed
- Comparing connection types
- Open design reveals the inside
- Safe experimentation at safety extra-low voltage
- Tool-free rotor change
- Analyzing industrial starting methods
Rotating field machines drive industry and generate electrical energy in power plants. The open experiment card makes their differences visible: learners look inside the machine and follow how the rotating field is created and induces voltage. They exchange slip-ring, synchronous and reluctance rotors without tools and compare speed and load behavior directly. Six starting resistors with short-circuit relays are integrated on the card, so that the startup of the slip-ring rotor can be controlled and the inrush current measurably reduced. The stroboscope provides the speed, while LabSoft and virtual instruments provide the measured values and evaluation. All experiments are carried out at safety extra-low voltage.
| Base Product | |
| CO4204-7V | Course Electric Machines 3: Synchronous and slip-ring machines |
| Accessories | |
| CO4203-2A | UniTrain Interface mit virtuellen Instrumenten (Basis VI) |
| CO4203-2J | UniTrain measurement accessories, shunts and connection cables |
| CO4203-2Y | UniTrain storage case for one UniTrain system |
| CO4203-2B | UniTrain Experimenter |
Learning Content in Detail
Comparing machine behavior
Reducing starting currents
Determining synchronous speed
Comparing connection types
Features & Applications
- Open design reveals the inside — Learners look at the inside of the electrical machine. Thanks to the open design, they grasp how the rotating magnetic field is generated and how voltage is induced.
- Safe experimentation at safety extra-low voltage — The system works exclusively with safety extra-low voltage, allowing learners to wire and measure safely, directly at the workstation.
- Tool-free rotor change — Learners exchange the slip-ring, synchronous and reluctance rotors at the workstation. This allows them to compare the different speed and load behavior of the three machines directly, one after the other.
- Analyzing industrial starting methods — Learners investigate the starting of rotating field machines. They switch resistors into the rotor circuit of the slip-ring rotor and measure how much this reduces the inrush current.
- Experiment card with two-pole stator — The two-pole stator has three windings. Using 2 mm jacks, learners connect it in star or delta and carry out voltage and current measurements.
- Three interchangeable rotors — Slip-ring, synchronous and reluctance rotors are included in the scope of delivery. With them, learners can build different rotating field machines in seconds and without tools.
- Stroboscope with ultra-bright LED — Learners use the stroboscope to determine the rotor speed optically. From this, they derive the slip of the machine under different conditions.
- Integrated starting resistors and relays — The experiment card contains six starting resistors and short-circuit relays. Learners use them to control motor startup and limit damaging inrush currents.
- Integrated temperature monitoring — A built-in temperature sensor monitors the field winding. Learners measure the temperature rise at different currents and avoid thermal overloads.
- LabSoft digital learning environment — The software combines theory and practice. Learners read the instructions, answer interactive tests and save their measurement results directly in the HTML interface.
- Virtual instruments of the UniTrain system — Learners control the system via the PC. Virtual three-phase power supplies, multimeters and oscilloscopes provide real-time measurements of currents and voltages.
- Virtual motor control — Learners operate the machine via a virtual control panel. They adjust the supply voltage continuously and switch the starting resistors via relays.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.