Skip to content

Digital Electronics

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Digital Electronics

BDI01ET

EloTrain training system with 22 digital technology plug-in components in 4 mm format. Learners plug logic gates together to form adder, code and flip-flop circuits and measure the states at the inputs and outputs.

Learning Content
  • Verifying gate functions
  • Building and evaluating half adders
  • Converting between number systems
  • Analyzing 1-bit full adders in NAND logic
KEY FEATURES
  • Comprehensive logic gate library
  • Building arithmetic circuits
  • Comprehensive flip-flop analysis
  • Industry-relevant code conversion
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

Digital technology is the basis of interference-free data transmission, fast signal processing and the microprocessor control of networked installations. This training system makes it tangible: learners plug logic gates together on the EloTrain plug-in board to form arithmetic and memory circuits and check their function by taking measurements at the inputs and outputs. The set comprises 22 digital technology plug-in components with AND, NAND, OR, NOR and XOR gates, as well as code converters and flip-flops. Wiring is done on the top via 2 mm jacks, while power is supplied from below via 4 mm plugs. By the end, learners build half adders and full adders using NAND logic, check truth tables and use flip-flops for control tasks such as a motor control circuit or bounce-free pushbuttons.

PS4400-1GEloTrain digital technology set, 4mm plug-in components
SO2804-8BInteractive Lab Assistant: EloTrain Digital Electronics
CO3535-5HEloTrain plug-in board 2/4mm, 120 nodes
SO5146-1MEloTrain set of connection cables and plugs for 4mm system
CO3538-8MMulti Power Supply 4x DC, 2x AC, 3-phase, function generator
LM2332Max 10 digital multimeter

Learning Content in Detail

Learners acquire the skills to analyze basic digital circuits, build them themselves and verify their function by measurement.

Verifying gate functions

Learners investigate NOT, AND, NAND, OR and NOR operations and check the switching conditions using truth tables.

Building and evaluating half adders

Learners implement half adders using NAND logic and evaluate the formation of sum and carry by measurement.

Converting between number systems

Learners become familiar with binary, decimal and hexadecimal numbers and convert between the systems.

Analyzing 1-bit full adders in NAND logic

Learners build a 1-bit full adder and verify the formation of sum and carry by measurement.

Trying out subtractor circuits

Learners build subtractor circuits and demonstrate that subtraction can be traced back to the structure of an adder.

Performing code conversion

Learners wire up code converters and check their function using the code tables.

Investigating basic flip-flops

Learners build RS flip-flops using NOR and NAND logic and analyze their storage behavior experimentally.

Testing clocked storage elements

Learners investigate clocked RS flip-flops as well as static and dynamic D flip-flops for capturing discrete-time signal changes.

Comparing JK flip-flops

Learners explore the differences between JK and JK master-slave flip-flops and avoid undefined output states.

Implementing flip-flop applications

Learners use storage elements for control tasks, such as a motor control circuit or bounce-free pushbuttons.

Features & Applications

The experiments address tasks from the servicing and maintenance of electrical systems, from assembly, commissioning and testing, and from electronics development.
  • Comprehensive logic gate library — AND, NAND, OR, NOR and XOR gates are available in sufficient numbers. Learners use them to build all the basic digital circuits and verify the laws of Boolean algebra.
  • Building arithmetic circuits — Learners build half adders, full adders and subtractor circuits from discrete gates and analyze how sum, difference and carry are formed in the binary system.
  • Comprehensive flip-flop analysis — RS, D, JK and JK master-slave flip-flops are built from discrete gates. Learners use them to explore the behavior of sequential circuits and state memories.
  • Industry-relevant code conversion — The system covers conversion between BCD code, Gray code and 1-of-10 representation. This shows learners how interfaces in digital systems are structured.
  • Separate routing for supply and signals — The 4 mm plugs on the underside provide the power supply, while learners connect the digital inputs and outputs on the top using flexible 2 mm experiment cables. This keeps the setup clear.
  • Integrated status LEDs — LEDs fitted at the outputs indicate the high or low level immediately. Learners can see the switching state at a glance without having to measure each time.
  • Circuit wiring on the top — The logic components are connected via 2 mm jacks on the top. The signal path remains visible and the circuit setup is easy to follow.
  • Scratch-resistant digital printing on the components — The high-contrast print shows the standard-compliant circuit symbol and the type designation of the gate, so learners can identify the components more quickly during setup.
  • EloTrain 4 mm plug-in board — 120 numbered nodes with 4 mm safety jacks and 2 mm jacks allow a clear layout with a high component density.
  • LabSoft course software — LabSoft guides learners interactively through the experiments with texts, graphics and animations, controls the hardware via USB and documents learning progress.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply