DC Machines 300W
DC Machines 300W
The modular PanelTrain training system for practical analysis of DC machines in motor and generator operation.
- Comparing machine types
- Controlling speed and direction of rotation
- Recording load characteristics
- Analyzing generator behavior
- Analyzing DC motors and generators
- Dynamic four-quadrant operation
- Safe experimenting under maximum load
- Simulating real driven machines
DC machines have become less common in industrial use, but they remain the didactic foundation of electrical drive technology. They make it particularly easy to demonstrate the principles of open-loop and closed-loop control of motors and generators. The training system introduces learners to the operation, speed control and load behavior of the different machine types under realistic industrial conditions. For this purpose, a 0.3 kW DC multifunction machine combines shunt, series and compound windings, while the servo machine test system loads it in four-quadrant operation and emulates pumps, fans or calenders. From the recorded characteristics, learners determine operating points and evaluate the behavior in generator operation.
| Base Product | |
| SE2682-3D | DC multi-circuit, compound wound machine, 0.3 kW |
| CO3212-6W | Universal rheostat for 300W machines |
| LM89527 | Stabilized high voltage DC supply 1500W, 300V, US version |
| CO3212-5W | Exciter power supply for electrical machines |
| SO2805-1A | Interactive Lab Assistant: Gleichstrommaschinen 0,3 kW |
| Measuring Instruments | |
| CO5127-2A | Power-Multimeter |
| Accessories | |
| CO3636-6X7 | Dynamic servo machine test stand for 300W machines incl. control software ActiveServo 2.0 |
| SE2662-2A | Rubber coupling sleeve, 0.3kW |
| SE2662-7C | Coupling guard with LED lighting for 300W machines |
| Furniture | |
| ST7200-7A7 | Mobile workstation, 3 level frame, 6 sockets, 1250x1970x800 mm, 49"x77.5"x31.5" |
| ST8010-4T | Monitor holder for flat screen monitor of weight up to 15kg / 33lbs |
| ST7200-5L | Protection cover for three-level experiment trolleys |
| ST8010-4G | Keyboard adapter for flat screen monitor holders |
| ST8008-8N7 | Protected power distribution for workstations |
| ST8010-4J8 | Multiple power outlet strip, 6 outlets, US-standard |
| Furniture Accessories | |
| ST8000-5A | Display for Electrical Machines equipment |
| Measurement Leads | |
| SO5148-1L | Set of safety measurement cables, 4mm (31 leads) |
| SO5126-3R | Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II |
| SO5126-3V | Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II |
| SO5126-3W | Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II |
Learning Content in Detail
Comparing machine types
Controlling speed and direction of rotation
Recording load characteristics
Analyzing generator behavior
Features & Applications
- Analyzing DC motors and generators — Learners investigate shunt, series and compound machines on a single platform. They compare the specific motor and generator behavior directly.
- Dynamic four-quadrant operation — The system allows load tests in all four quadrants. Learners adjust torque and speed continuously and evaluate the measurement series on the PC.
- Safe experimenting under maximum load — Thermal sensors, short-circuit protection and shaft covers protect the hardware. Learners run the machines up to their power limit without risking damage.
- Simulating real driven machines — Using the software, learners emulate load profiles such as pumps, fans or calenders. They investigate how the drive behaves under these industrial load requirements.
- Determining operating points automatically — Freely definable ramp functions control the load tests from the PC. This enables learners to determine static and dynamic operating points precisely.
- DC multifunction machine, 0.3 kW — The machine combines shunt, series and compound windings. An electronic nameplate (EDD) assists with parameterization in the test software.
- Servo machine test system — The control unit and servo motor form the test system. Learners control torque or speed precisely and measure the resulting mechanical and electrical quantities.
- Regulated high-voltage DC power supply — The 1500 W source supplies the armature circuit precisely. Learners use constant voltage or constant current mode (CV/CC) to replicate various load scenarios.
- Excitation power supply and universal resistor — The continuously adjustable resistors serve as field regulators or starters. Learners use them to investigate speed control and armature reaction in practice.
- Power multimeter with touch display — The measuring instrument records voltages, currents and power regardless of waveform. Learners evaluate the signal waveforms directly on the PC via the electrically isolated USB interface.
- ActiveServo software for machine analysis — Learners use the software to record characteristics. They configure ramps, record torque curves and export the measurement series for evaluation.
- Interactive ILA course — The software guides learners through all the experiments using multimedia. Learners answer knowledge questions, operate virtual instruments and save measured values by drag and drop.
- Load simulation module — The software superimposes the motor characteristic on the characteristic of a virtual driven machine. Learners follow the current operating point live on the crosshair.

From Knowledge Comes Capability.
You guide the learning
Where theory and practice go hand in hand.
RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.
Hands-on and interactive
Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.
Digital support
3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.
Visual support
Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.




Stay ahead in
technical training.
Get the latest training systems, product launches and educational insights, delivered directly to your inbox.