DC stabilizer 2x 0-30V/0-10A with TFT display, 42PU
Microcontroller-controlled DC power supply 2x 0-30 V / 0-10 A (320 W)
Compact power supply for all basic topics and more advanced experiments from the areas of electrical engineering / electronics and digital technology. The device has protective insulation and supplies safety extra-low voltages in accordance with EN 61010. All outputs are equipped with self-resetting fuses which reliably disconnect overcurrents without the need for fuse replacement. As a result, the device is very safe and has low maintenance requirements which makes it particularly suitable for beginners. Its modern technology ensures low energy consumption and reduces power losses. The device needs only a single-phase power supply. It is a built-in device which can either be integrated in a power duct or installed in a table-top housing, thereby becoming an external device.
Using the optionally available Lab Manager software, this device can be controlled remotely from a central PC as an individual device or in combination with multiple devices. The same applies for the simultaneous use of one or more devices together with the LN SybaNet system.
- 2 x outputs 0-30 V/ 0-10 A (max. 160W per output)
- The outputs are cascadable for higher voltages and currents
- Setting via 2 continuously adjustable multi-turn potentiometers with metal shaft
- Choice of fine or coarse adjustment via an integrated touch/switch function in the potentiometers (4-fold incremental adjustment)
- 4mm safety sockets (shock protection)
- Switched-mode power supply technology, short-circuit-proof
- Adjustable load contactor: Over-current (OCP) and over-voltage (OVP) protection
- Adjustable over-temperature (OT) protection
- Short-circuit-proof with automatic reset fuses
- Network-compatible in conjunction with a SMART Lab Manager system
- USB interface including 1m lead (rear side)
- Including software for monitoring and control via PC or Lab Manager software
- 2 four-digit colour TFT displays (1 per channel) for current and voltage (320x240 points)
- Convection cooling
- Safety according to EN 60950
- Automatic adjustment of current and voltage to the maximum load
Technical data:
Input voltage: 90-264 V/ 45-65 Hz
- Power factor: >0.99
- Touch function
Output voltage: 2 x 0-30 V, continuously variable
- Stability at 0-100% load: <0.15%
- Residual ripple BWL 20 MHz: <63 mVpp/5 mV RMS
- Compensation 10-100% load: <2 ms
- Accuracy: <0.2%
Output current 0-10 V, continuously variable
- Stability at 0-100% load: <0.15%
- Stability at +10%: <0.15%
- Residual ripple: <5 mA RMS
- Accuracy: <0.2%
General
- Efficiency: 85%
- Output power: 320 W (2 x 160 W)
- Protection class: I, over-voltage category: 2
- Standard: EN 61010-1
- Weight: 2.4 kg