Multi-function relay, power controller, cos-phi controller, synchronizing unit
The multi-function relay has been designed for the control, protection and monitoring of generators. The settings and parameters may be set using a membrane keyboard on the front panel or with a PC. Remote control via interface and discrete/analog inputs for adjusting speed, frequency, voltage, power, reactive power, and power factor set points. This unit complies with all currently applicable guidelines.
Control functions:
- Automatic synchronisation
- Automatic power control
- Automatic power factor control
- Automatic voltage control
- Automatic frequency control
- Automatic active and reactive power distribution
- Operating data acquisition
Protective and monitoring functions:
- Generator: voltage/frequency (ANSI 59 / 27 / 81O / 81U)
- Generator: overload, reverse/reduced power (ANSI 32 / 32R / 32F)
- Generator: unbalanced load (ANSI 46)
- Generator: instantaneous overcurrent (ANSI 50)
- Generator: time-overcurrent (ANSI 51)
- Generator: ground fault (ANSI 50G)
- Generator: power factor (ANSI 55)
- Generator: rotation field
- Generator set: speed/frequency mismatch
- Grid: voltage/frequency/phase shift/ROCOF (ANSI 59/27/81O/81U/78)
- Grid: rotation field
Technical data:
- Measuring voltage: 380...440 V/AC
- Measuring frequency: 40....85 Hz
- Measuring current: 2.5 A
- Outputs: Relay manager with 3 floating relays
Synchronising output LS-on
Synchronising output LS-off
- Inputs: Circuit-breaker (LS) acknowledgment signaling
- Displays: 2 LED – Alarm, Stop
red lamp – Circuit-breaker (LS) on
128×64 dot graphical interactive LC display with soft keys
- Interface: USB
- Motor protection switch, 1 - 1.6A
- Measuring inputs: 4-mm safety sockets
- Dimensions: 297 x 456 x 200 mm (HxWxD)
- Weight: 2.7 kg